Loading ...
Loading ...
Loading ...
NORMA 4000/5000
Operators Manual
7-4
Five Steps
To set up a configuration, complete the following steps:
• Call up General Setup (optional)
• Configure current and voltage channels
• Configure average time and synchronization
• Configure data transfer to printer and PC
• Save configuration
For instructions on how to configure the PI1 process interface, please refer to Chapter 9,
"NORMA Analog Interface (Optional)."
For instructions on how to delete a configuration, please refer to chapter 7 "Delete
Configuration.”
Call up General Setup and System Information Screen
General Setup
1. Switch on the Power Analyzer and the start screen is displayed.
2. Move the cursor to the menu item General Setup that shows the name of the
currently loaded configuration (in the example following, 1:W3).
3. Press Enter. The General Setup menu is displayed.
esn019.gif
System Information Screen
From the General Setup menu:
1. Press function key Info…. The System Info menu is displayed.
This screen shows the basic information about the Power Analyzer:
System Device type and sample rate
Phases Type and number of equipped power phases
Options Equipped interfaces and options
Serial Serial numbe
r
Version Firmware version
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...