Loading ...
Loading ...
Loading ...
輐
ȗ
TROUBLESHOOTING
1
9
Problem Cause C
orrection
Engine Will Not
Turn Over
1. Control levers not in neutral position.
2. Battery is undercharged or failing.
3. Circuit breaker on engine tripped.
1. Make sure control levers are in the
middle of their travel.
2. Charge or replace the battery.
3. Reset circuit breaker at engine.
Excessive
Vibration
1. Worn, bent or loose PTO Adapter.
2. Loose hardware on PTO shaft.
1. Replace PTO adapter; Tighten PTO
adapter bolts.
2. Tighten PTO shaft bearing mounting
hardware.
Loss of Power
To Engine
1. Faulty fuse.
2. Wire harness not fully connected.
3. Emergency Shut-off Switch
engaged.
1. Replace faulty fuse.
2. Ensure wire harness is connected.
3. Ensure the shut-ff switch is
disengaged.
No Power To
Attachment
1. Operator Control presence not
activated.
2. PTO shaft not connected to PTO
adapter (Tractor).
3. Bent or Damaged PTO shaft.
4. Loose or damaged belt on
Attachment.
5. Loose or damaged engine-to-PTO
adapter belt.
6. Loose or faulty clutch wiring
harness.
7. Faulty clutch.
1. Operator must be present at the
control levers if required by
attachment.
2. Ensure the PTO shaft is connected
to the Tractor PTO adapter.
3. Replace PTO shaft.
4. Tighten or replace gearbox-to-
attachment belt.
5. Tighten or replace engine-to-PTO
adapter belt.
6. Ensure clutch wiring is tight and not
damaged.
7. Replace clutch.
Loading ...
Loading ...
Loading ...