Loading ...
Loading ...
Loading ...
Network Video Recorder User Manual
28
Figure 5-8 Motion Detection
2. Select a camera.
3. Turn on Enable.
4. Set VCA Mode as By NVR or By Camera.
By NVR
The motion detection event will be analyzed by NVR. The device can analyze videos that
contain human and vehicle. Only the target of selected type (human or vehicle) will trigger
alarms, which can reduce false alarms that are caused by other objects.
By Camera
The motion detection event will be analyzed by camera.
5. Set the motion detection area.
– Click Draw Area or Clear to draw or clear areas. The first area is set as full screen by default.
– Click Full Screen to set the motion detection area as full screen. You can drag on the preview
window to draw motion detection areas.
6. Adjust Sensitivity. Sensitivity allows you to calibrate how easily movement could trigger the
alarm. A higher value results in the more readily to triggers motion detection.
7. Optional: Set Target Detection as Human or Vehicle to discard alarms which are not triggered
by human or vehicle.
Note
When VCA Mode is set as By NVR, the human/vehicle target detection is conflicted with 4K/2K
output resolution, please lower the resolution.
8. Set the arming schedule. Refer to Configure Arming Schedule for details.
9. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
10. Click Apply.
Loading ...
Loading ...
Loading ...