Loading ...
Loading ...
Loading ...
Network Video Recorder User Manual
1
Chapter 1 Startup
1.1 Activate Your Device
For the first-time access, you need to activate the video recorder by setting an admin password.
No operation is allowed before activation. You can also activate the video recorder via web
browser, SADP or client software.
Before You Start
Power on your device.
Steps
1. Select a language.
2. Click Apply.
3. Set the resolution as 1920*1080/60Hz (1080P) as needed.
Note
The resolution is 1280*720/60Hz (720P) by default. If you check Do not show this prompt again.,
the prompt will not appear again after rebooting.After the device is connected to the monitor with
HDMI cable, the resolution will be automatically adjusted to 1920*1080/60Hz (1080P). Some
monitor models do not support resolution adaptation.
4. Input the same password in Password and Confirm Password.
Figure 1-1 Activation
Loading ...
Loading ...
Loading ...