Smeg EMC02BLMEU Minipro manual espresso coffee machine

User manual EN - Page 8

For EMC02BLMEU.

PDF File Manual, 25 pages, Read Online | Download pdf file

EMC02BLMEU photo
Loading ...
Loading ...
Loading ...
EN - 1
EN
1 Warnings
Keep these instructions carefully.
Whenever the appliance is
transferred to other persons, it
must be accompanied by these
user instructions.
Electrocution Hazard, since the machine is
powered by electricity, the following safety
warnings must be complied with:
Do not touch the plug with wet hands.
Make sure that the power outlet used is always
freely accessible, because only in this way can
it be unplugged when necessary.
If the plug is to be removed from the socket,
grasp the plug directly. Do not remove the plug
from the socket by pulling on the cable or with
wet hands.
If the machine should suffer a malfunction, do
not attempt to repair it. Switch the appliance
off, remove the plug from the power outlet and
contact the Smeg Technical After-sales centre.
If the plug or power supply cable are
damaged, have them replaced exclusively by
the Technical After-sales centre, so as to prevent
all risks.
Do not immerse the appliance, the power
cable or the plug in water or any other liquid.
Caution: Injury hazard! Improper use of the
appliance can cause injuries. Disconnect the
plug before cleaning.
Do not allow the power cable to hang over
the edge of the table or any other surface, or
to come into contact with hot surfaces.
Suffocation hazard due to plastic packaging, keep
the packaging material (plastic bags, expanded
polystyrene) out of the reach of children.
Do not position the appliance on or in proximity
of electric or gas cookers, or in a heated oven.
Do not wash the appliance in the dishwasher.
The surface of the heating element remains hot
after use and the outside of the appliance may
retain heat
Caution – To prevent damage to the appliance
do not use alkaline cleaning agents when
cleaning, use a soft cloth and a mild agent
The coffee machine must not be placed in a
cabinet when in use
1.1 Connecting the appliance
Make sure that the mains voltage and the
frequency correspond with that indicated on the
data plate on the bottom of the appliance.
Only connect the appliance to a current outlet
installed perfectly with minimum capacity of 10A
and with efcient earth.
If the appliance power outlet and plug are
incompatible, have the power outlet replaced
with a suitable type by qualied staff.
In order to avoid a hazard due to involuntary
resetting of the thermal cut-out, this appliance must
not be powered through an external switching
device, such as a timer, or be connected to a
circuit that is regularly switched on and off by
the utility.
Do not use an adapter.
Do not use an extension.
Do not spill liquids on the power plug and on
the power base.
Important safety information
Loading ...
Loading ...
Loading ...