Loading ...
Loading ...
Loading ...
EN - 5
EN
3
Before commissioning
(Fig. A)
• Unpack the appliance carefully and remove
all packaging materials.
• Rinse the removable components with
lukewarm water, such as: water tank (5) lid
(4), drip tray (11).
Before use, check that all the
components are integral and do
not have any cracks.
•
Place the machine on a flat surface and fix
the drip tray (11).
•
Connect the power supply cable to the
socket on the rear of the machine and the
other end to a power socket.
4 Use
Before starting the coffee
machine, carefully read chapter
“1 Warnings” and the “Before
commissioning” paragraph.
4.1 Machine switch-on (Fig.B)
• Make sure that the drip tray (11) complete
with cup grill (10) is correctly mounted at
switch-on and before all dispensing.
• Lift the tank (5) lid (4) and pour fresh water
in the tank making sure not to exceed the
indicated ‘Max’ level and then re-mount the
lid (4).
• Turn the coffee machine on by pressing the
ON/OFF button (8):
The display (2) shows the increasing value
of the coffee temperature and the buttons
(3) ash. The coffee machine is ready for
use as soon as all the buttons are on with
a xed light and the display shows the
temperature of the coffee set previously.
4.2 Commissioning (Fig.A)
On commissioning it is
recommended to set the water
hardness as indicated in the
"Water hardness" paragraph.
On commissioning, the internal
circuits must be rinsed. Proceed as
described below.
• Insert the desired lter into the lter-holder
(9) and position it without coffee under the
brewing unit (12) and block it in position.
• Switch the machine on as described in the
“Machine switch-on” paragraph.
• Place a cup or large cup under the
dispenser (12).
• Position the lever
(6) upwards (Start position)
to dispense the coffee; ll the cup halfway and
then rotate the lever (6) again downwards (Stop
position) to end dispensing
.
It is recommended to rinse the
internal circuits also when the
coffee machine has not been used
for a long period of time and every
time it is turned on.
Use
Loading ...
Loading ...
Loading ...