Loading ...
Loading ...
Loading ...
© 2023 RVM Australia Pty Ltd. All Rights Reserved
7
OPERATION (MANUAL)
OPERATION (PRESETS)
1. As indicated in the installation instructions, please complete the rinse cycle
before
use. Refer installation guide on page 5.
2. Place a cup on the removable water tray (5) ensuring the cup aligns with the
spout (3).
-
To use this function, place a suitable collection container onto the removable
water tray (5) ensuring the container aligns with the spout (3). Unlock the unit
then press and hold the milk button down until the desired amount of water is
dispensed. Place the baby bottle with milk / formula premixed into dispensed
water to bring milk or formula up to desired temperature.
-
To use this function, place a suitable coffee cup or teacup
onto the removable water tray (5) ensuring the container aligns with the spout
(3). Unlock the unit then press the Coffee / Tea button. Then unit will display
92 degrees celcius as the default temperature. Select the volume (100, 200,
300, 400ml or 000 for continuous and press the Start / Stop button to
begin dispensing water.
3. Hold the lock button for 3-5 seconds until the unit unlocks. (When unlocked, the
control panel will light up showing multiple presets and functions)
4. Press the Temp. button to select the desired temperature. (000, 45, 55, 65,
75, 85 or 100 degrees celcius approx.)
Tip: When set to 000, the unit will dispense water at the temperature of the
water in the water tank.
5. Press the Volume button to select the desired volume of water to be dispensed.
(100, 200, 300, 400ml or 000 for
Tip: When using press the
Start/Stop button to start and stop the of water.
6. Press the Start/Stop button to begin dispensing of the water. To stop at any
time, please depress the Start/Stop button to cancel the current operation.
overheat
Loading ...
Loading ...
Loading ...