Loading ...
Loading ...
Loading ...
© 2023 RVM Australia Pty Ltd. All Rights Reserved
5
ELECTRICAL REQUIREMENTS
POWER SUPPLY CORD
1. Do not attempt to modify the power cord or plug in any way.
2. A short power supply cord is provided to reduce the risk of becoming entangled
in or tripping over a longer cord.
3. If the power supply cord is too short, do not use an extension cord. Have a
electrician or serviceman install an outlet near the appliance.
NOTE: Neither Westinghouse nor the retailer can accept any liability for damage to
the product or personal injury resulting due to the failing of observing the electrical
connection procedures.
INSTALLATION GUIDE
1. Carefully unpack your new appliance.
2. Carefully remove packaging around the appliance and power cord. Do not
remove warning labels.
3. Complete rinse cycle as as per below: (refer page 6 for control panel diagram)
- Press and hold the lock button for around 3-5 seconds to unlock the appliance.
- Press the Temp. button repeatedly until 000 (degrees) is selected.
- the Volume button repeatedly until 000
is selected.
button to stop
to stop
- Press Temp. button repeatedly until 100 (degrees) is selected.
- Volume button repeatedly until 000
is selected.
- remaining water *CAUTION HOT* and discard. Once completed,
- The appliance is now ready for use. Select desired functions to use. (see
DANGER:
***NOTE: If error code E7 is shown on the screen, the applicance is indicating a lack
the reservoir prior to commencing operation.***
Do not under any circumstances immerse the appliance body, mains cord
or mains plug in water or any other liquid.
Press
Press
Dispense
to the 4L mark.
Loading ...
Loading ...
Loading ...