Loading ...
Loading ...
Loading ...
Chapter 1 Quick Start RIGOL
DS1000Z-E User Guide 1-19
horizontal time base.
5. Waveform Memory
Provide the schematic diagram of the memory position of the waveform
currently on the screen.
6. Trigger Position
Display the trigger position of the waveform in the waveform memory and on
the screen.
7. Horizontal Position
Use HORIZONTAL
POSITION to modify this parameter. Press down the
knob to automatically set the parameter to zero.
8. Trigger Type
Display the currently selected trigger type and trigger condition setting.
Different labels are displayed when different trigger types are selected.
For example, represents triggering on the rising edge in "Edge" trigger.
9. Trigger Source
Display the trigger source currently selected (CH1, CH2, AC Line, or EXT).
Different labels are displayed when different trigger sources are selected and
the color of the trigger parameter area will change accordingly.
For example, denotes that CH1 is selected as the trigger source.
10. Trigger Level
When an analog channel is selected as the trigger source, you need to set a
proper trigger level.
The trigger level label
is displayed at the right of the screen and the
trigger level value is displayed at the upper-right corner of the screen.
When using TRIGGER
LEVEL to modify the trigger level, the trigger
level value will change with the up and down of .
Note: In slope trigger, runt trigger and window trigger, two trigger level labels
( and ) are displayed.
11. CH1 Vertical Scale
Display the voltage value per grid of CH1 waveform vertically.
Press CH1 to select CH1, and use VERTICAL
SCALE to modify this
parameter.
The following labels will be displayed according to the current channel
setting: channel coupling (e.g.
) and bandwidth limit (e.g. ).
waveform on the screen
waveform in the memory
Loading ...
Loading ...
Loading ...