Loading ...
Loading ...
Loading ...
RIGOL Chapter 1 Quick Start
1-12 DS1000Z-E User Guide
Front Panel Function Overview
VERTICAL
CH1, CH2: analog channel setting keys. The 2
channels are marked by different colors which
are also used to mark both the corresponding
waveforms on the screen and the channel
input connectors. Press any key to open the
corresponding channel menu and press again
to turn off the channel.
MATH: press MATH ïƒ Math to open the
math operation menu under which A+B, A-B,
A×B, A/B, FFT, A&&B, A||B, A^B, !A, Intg, Diff,
Sqrt, Lg, Ln, Exp, Abs and Filter operations are
provided. You can also press MATH to open
the decoding menu and set the decoding
options.
REF: press this key to enable the reference waveform function to compare the
waveform actually measured with the reference waveform.
VERTICAL
POSITION: modify the vertical position of the current channel
waveform. Turn clockwise to increase the position and turn counterclockwise to
decrease. During the modification, the waveform would move up and down and the
position message (e.g.
) at the lower-left corner of the screen would
change accordingly. Press down this knob to quickly reset the vertical position to
zero.
VERTICAL
SCALE: modify the vertical scale of the current channel. Turn
clockwise to decrease the scale and turn counterclockwise to increase. During the
modification, the display amplitude of the waveform would enlarge or reduce. The
scale information (e.g.
) at the lower side of the screen would change
accordingly. Press down this knob to quickly switch the vertical scale adjustment
mode between "Coarse" and "Fine".
Tip
How to set the vertical scale and vertical position of each channel?
The 2 channels of DS1000Z-E use the same VERTICAL
POSITION and
VERTICAL SCALE knobs. If you want to set the vertical scale and vertical
position of a channel, please press CH1 or CH2 at first to select the desired
channel. Then turn the VERTICAL POSITION and VERTICAL SCALE
knobs to set the values.
Loading ...
Loading ...
Loading ...