Rigol DS1202Z-E DS1000Z E user guide

Loading ...

RIGOL Chapter 6 MATH and Measurement

6-20 DS1000Z-E User Guide

Abs

Calculate the absolute value of the selected source and display the results.

Press MATH  Math  Operator to select "Abs":

 Press Operation to enable or disable the "Abs" operation function.

 Press Source to select the desired channel (CH1, CH2, or fx (please refer to the

introduction in "Fx Operation")).

 Press Offset and use to adjust the vertical position of the operation results.

 Press Scale and use to adjust the vertical scale of the operation results.

 Press Scale Reset to adjust the vertical scale of the operation results to the

optimal value according to the current configuration.

 Press Options to set the start and end points of the operation results, enable or

disable waveform invert, etc.

― Press Start and use to set the start point of the operation results.

― Press End and use to set the end point of the operation results.

― Press Invert to enable or disable the inverted display function of the

waveform.

― Press Auto Scale to enable or disable the auto scale function. When auto

scale is enabled, the instrument will adjust the vertical scale of the

operation results to the optimal value according to the current

configuration.

― Press fx Operator, fx A and fx B to set the operator and signal sources of

the inner layer operation of Fx operation (please refer to the introduction in

"Fx Operation").

Note: Smooth is grayed out and disabled. Smooth is only available for

differential operation.

 You can also use HORIZONTAL

POSITION and HORIZONTAL

SCALE to adjust the horizontal position and scale of the operation results.

Filter

DS1000Z-E provides 4 types of filters (Low Pass Filter, High Pass Filter, Band Pass

Filter and Band Stop Filter). The specified frequencies can be filtered by setting the

bandwidth.

Press MATH  Math  Operator to select "Filter":

 Press Operation to enable or disable the "Filter" operation function.

 Press Source to select the desired channel (CH1 or CH2).

 Press Offset and use to adjust the vertical position of the operation results.

 Press Scale and use to adjust the vertical scale of the operation results.

Loading ...

Rigol DS1202Z-E oscilloscope