John Deere BG21298 User Manual

Loading ...

APY24932—UN—11DEC19

1. Install handle assembly (A) to hinge pin with a M8 lock nut (B).

Tighten lock nut until snug on handle.

APY24931—UN—11DEC19

2. On the top side of deck, install M8 lock nut (C) on the shoulder bolt

(D) to secure handle assembly.

Specication

M8 Nut—Torque. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 N·m

(15 lb·ft)

SB31882,00003E2-19-02JUN20

Removing and Storing MulchControl Deck (If

Equipped)

Removing MulchControl™

1. Remove the mower deck. (See Removing Mower Deck in this

section of the manual.)

CAUTION: Avoid injury! Blades are sharp. Always wear

gloves when handling blades or working near blades.

Replace blades if defective. Never straighten or weld them.

2. Remove mulch blades.

APY24982—UN—16DEC19

3. Remove discharge plate (B) from discharge area by removing the

hex ange bolts (A) and hex ange nuts.

APY24977—UN—16DEC19

4. Loosen nuts (D) and remove the handle assembly (C).

APY24979—UN—16DEC19

5. Loosen hex nuts (E) and remove M8 bolts and then remove the

LHS deector assembly (F).

APY24980—UN—16DEC19

6. Loosen hex nuts (H) and remove M8 bolts and then remove the

RHS deector assembly (G).

MulchControl is a trademark of Deere & Company

Service Mower

Loading ...

John Deere BG21298 Z325e Ztrak 54-in 24-hp V-twin Gas Zero-turn Riding Lawn Mower