Loading ...
Loading ...
Loading ...
APY538834—UN—07JUN22
1. Pull bypass control rods (A) rearward through the key hole slot and
place the collar (B) into the detent slot (C) to engage bypass valve.
2. Release park brake.
3. Push machine to desired location and lock park brake.
NOTE: The bypass control rods should be disengaged before starting
and operating the machine.
APY536234—UN—25APR22
4. Move both bypass control rods from their detent slot and push back
the control rods to the original position (C).
GH8XT3T,00009BD-19-13JUN22
Unplugging Mower, Bagger, or Material Collection
System
CAUTION: Avoid injury! Do not attempt to unplug
attachment with the machine running.
● Rotating blades are dangerous. Shut off the engine and
remove the key before getting off the seat to inspect the
machine and attachment.
● Thrown objects can cause serious injury. Make sure that
all machine parts are stopped before raising hopper top
or removing chutes.
Checking for Plugging While Driving
If grass builds up in the front of the mower discharge chute, check for
plugged chute or problems with blower assembly (if equipped).
If there is a trail of clippings behind mower or clippings blow to the
side, check for plugged chute, full collector bags, or problems with
blower assembly.
Removing Debris from Inspection Points:
CAUTION: Avoid injury! Do not use hands or feet to clear
plugged mower deck or blower assembly. Stored energy
can cause blades to rotate.
1. Park machine safely. Wait for all moving parts to stop before getting
off to inspect machine.
2. Open hopper cover. Check chute outlet.
3. Remove chute from the mower deck or blower assembly. Check
chute inlet.
4. Check under the mower deck for debris.
MP47322,00F4646-19-10JUL20
Using Wash Port to Clean Mower Deck
NOTE: Follow this procedure after each use to prevent buildup and
remove corrosive lawn chemicals.
1. Park machine safely. (See Parking Safely in the Safety section).
MX101450—UN—29APR20
2. Attach quick-coupler to the garden hose.
3. Attach garden hose with the quick-coupler to wash port (A) on the
mower deck.
4. Turn on water.
5. Start engine.
6. Run at full throttle.
7. Engage mower blades.
8. Flush water under the deck for approximately one minute.
9. Disengage mower blades.
10. Stop engine.
11. Turn off water and remove garden hose and quick-coupler from
the wash port.
SB31882,000040A-19-06MAY20
Transporting Machine on Trailer
NOTE: Trailer capacity must exceed combined machine weight and
attachment weight. (See Specications section in operator’s
manual.)
Operating
23
Loading ...
Loading ...
Loading ...