Loading ...
Loading ...
Loading ...
CAUTION: Avoid injury! Component is spring-assisted and
under tension. Injury can occur if spring-assisted
component is released suddenly.
5. Disconnect mower drive belt:
APY74528—UN—07JUN22
● Install 3/8 inch ratchet onto square hole (D) tension arm and
rotate counterclockwise to release tension on the belt.
PY43366—UN—30MAY17
● Lift spindle cover (E) while removing mower belt (F) from left
spindle sheave.
● Remove belt from the engine sheave.
APY69553—UN—18MAR22
6. Remove locking pin and washer (G) and front lift arm (H) from the
front deck bracket (I).
APY04442—UN—18JUL18
42A Mower Deck Left Side Shown
7. Remove spring pin (G) and pin from each side of the rear mower
bracket.
8. Rotate front caster wheels to maximize clearance.
9. Slide mower out from under the machine.
● Do not operate the machine without the mower deck: Machine
may become unstable without the mower deck attached. Move
machine only by hand. (See Moving Machine by Hand in
Operating section.)
GH8XT3T,00008D9-19-07JUN22
Removing Mower Deck (48A and 54A)
1. Park machine safely. (See Parking Safely in the Safety Section.)
2. Allow the engine and mufer to cool completely.
CAUTION: Avoid injury! Rotating blades are dangerous.
Before adjusting or servicing mower:
• Disconnect spark plug wires or battery negative (-) cable to
prevent engine from starting accidentally.
• Always wear gloves when handling mower blades or
working near blades.
APY69519—UN—08MAR22
3. Rotate the height-of-cut dial (A) in clockwise direction to the lowest
position (1.25") in the index mark (B) to lock position.
Service Mower
36
Loading ...
Loading ...
Loading ...