Loading ...
Loading ...
Loading ...
• To specify a specific program, rotate the dial to select A, B,
or C.
• Press the dial to activate.
• To select a specific station, continue rotating the dial until the
station number appears, then press the dial.
• Press the dial and the station number will flash. Rotate the
dial to the desired station, push the dial and rotate the dial
until the display shows the desired duration. Press the DIAL
to begin watering.
Note: More stations can be watered by repeating this same process
• To stop Manual Watering press [CLEAR].
• The timer will go back to your original automatic watering
schedule.
Example: To manually water on station 3 for five minutes,
rotate the dial to [MANUAL] then press the
dial. Rotate the dial until you see station 12, press the dial and
rotate it until you see station 3, then press the dial. Rotate the
dial until five minutes shows in the display then press the dial.
Note: After the [MANUAL] button has been pushed, if a selection
is not made within 5 seconds all stations and programs will begin
watering using the programmed RUN TIMES. If no RUN TIMES have
been set, nothing will happen and the display will return to the time
of day.
Example: Bill’s watering duration is set at 30 minutes however;
it is summertime so he wants to water twice as long so he sets
his budgeting to 200%, his timer will now water for 60 minutes.
Manual Watering
Your timer has the ability to allow you to manually water without
disturbing the preset program.
• Turn dial until [MANUAL] is highlighted, then press the dial.
• Display will show ALL. If you desire to water all stations, press
the dial.
• O and MINS will show in the display. Rotate the dial to
add the number of minutes and press the dial to begin
watering all zones for the selected duration.
• If you wish to water specific programs or stations, rotate the
dial until the program (A, B, C) or station 12 is showing in the
display, then press the dial.
• If stations are selected, you can set up time for one or
more stations to water using the same method used in
setting run time.
• All stations will water consecutively for their programmed
duration.
Note: If the run times have not been set, the timer will not initiate
manual watering and the screen will return to the current time.
ENGLISH
11
Loading ...
Loading ...
Loading ...