Loading ...
Loading ...
Loading ...
Wireless Multimeter
Hazardous Voltage
5
Hazardous Voltage
The hazardous voltage warning shows on the display
when the Product detects a voltage ≥30 V.
Test Lead Alert
The display shows LEAD for 1 second when you turn the
function switch to or from the mA position to remind you
to make sure the test leads are in the correct terminals.
Battery Saver (Sleep Mode)
To save battery power, the Product includes a sleep
mode. Sleep mode turns off the display if there is no
function change or button pushed for 20 minutes. To turn
off the sleep mode, push
while you turn on the
Product. The sleep mode is always turned off for a MIN
MAX AVG record session and when remote test tools are
shown on the display.
Wireless Radio
The Product uses low-power 802.15.4 wireless radio
technology to send or receive measurements to other
wireless test tools or the Fluke Connect
®
app on a mobile
device such as a smartphone or tablet.
You can set up to pair with:
• A mobile device. Use the Fluke Connect app to view
measurements remotely, save to Fluke Cloud™
storage, and share the information with your team.
• Up to three 3000 FC Series Wireless Test Tools.
Show their measurements on a single display.
• A 3000 FC Wireless Multimeter when it operates in
the send mode.
The wireless radio does not cause interference with meter
measurements.
Note
Changes or modifications to the wireless
2.4 GHz radio not expressly approved by Fluke
Corporation could void the user’s authority to
operate the equipment.
See Wireless Radio Setup on page 13 for instructions on
how to set up and use the wireless radio in the Product.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...