Loading ...
Loading ...
Loading ...
USA-CAN - 32
10. TROUBLESHOOTING
FAULT POSSIBLE CAUSE TROUBLESHOOTING
The program does
not start.
Your dishwasher is not plugged in. Plug your dishwasher in.
Your dishwasher is not switched on.
Switch your dishwasher on by pressing
the On/Off key.
Fuse blown. Check your indoor fuses.
Water inlet tap is closed. Turn on the water inlet tap.
Your dishwasher door is open. Close the dishwasher door.
Water inlet hose and machine filters
are clogged.
Check the water inlet hose and machine
filters and make sure they are not clogged.
Water remains inside
the machine.
Water drain hose is clogged or
twisted.
Check the drain hose, then either clean or
untwist it.
The filters are clogged. Clean the filters.
The program is not finished yet. Wait until the program is finished.
Machine stops during
washing.
Power failure. Check mains power.
Water inlet failure. Check water tap.
Shaking and hitting
noises are heard during
a wash operation.
The spray arm is hitting the dishes in
the lower basket.
Move or remove items blocking the spray
arm.
Partial food wastes
remain on the dishes.
Dishes placed incorrectly, sprayed
water not reaching affected dishes.
Do not overload baskets.
Dishes leaning each another.
Place dishes as instructed in the section on
loading your dishwasher.
Not enough detergent used.
Use the correct amount of detergent,
as instructed in the program table.
Wrong wash program selected.
Use the information in the program table to
select the most appropriate program.
Spray arms clogged with food
waste.
Clean the holes in the spray arms with thin
objects.
Filters or water drain pump clogged
or filter misplaced.
Check the drain hose and filters are
correctly fitted.
Loading ...
Loading ...
Loading ...