Loading ...
Loading ...
Loading ...
USA-CAN - 26
Delay Timer Key
It should be pressed to make the time delay
settings.
Options Key
It is used to add auxiliary functions to the
selected program.
8.2. Preparing The Machine
1. Open the door of the dishwasher.
2. Place the dishes in accordance with the
instructions in the user manual.
3. Make sure that the upper and lower
impellers rotate freely.
4. Put adequate amount of detergent into
the detergent dispenser.
5. Check if the Salt and Rinse Aid indicators
light and add salt and/or rinse aid if needed.
8.3. Program Selection
1. Press the On/Off key to turn on your
machine. Note that the door of the dish-
washer is OPEN position.
2. Refer the “Programs Table” to determine
a washing program suitable of your dishes.
3. Press program selection key until the
number of the program you selected
appears on the display.
In order to start the selected program,
Start/Pause key must be pressed and the
door of the diswasher must be closed within
4 seconds after the Start/Pause
key is pressed.
If the door is not closed within 4 seconds,
the machine will not start. In this case; to
start the selected program, the door must
be opened, the Start/Pause key must be
pressed and the door must be closed again
within 4 seconds after the Start/Pause key
is pressed.
If the door of the machine is opened when
the machine is running, the machine stops
working. If the door is closed back within
4 seconds after the door is opened, the
machine will continue.
If the door stays open for more than 4
seconds, Start/Pause key must be pressed
and the door of the diswasher must be
closed within 4 seconds after the
Start/Pause key is pressed.
8.4. Auxiliary Functions
Washing programs of your dishwasher are
designed to obtain the best cleaning effect,
considering the type of the soil, soiling
degree and properties of the dishes to be
washed. Auxiliary functions are provided in
order to enable you to save time, water and
energy and to perform a more comfortable
washing with conditions specific to you.
i. Auxiliary functions may cause changes in
the program duration.
ii. Auxiliary functions are not suitable for all
washing programs. Indicator of the auxiliary
function that is not compatible with the
program will not be active. Besides, the
machine gives aural warning via buzzer.
The compatibility of the programs and
options is shown on the “PROGRAMS AND
OPTIONS TABLE” section.
To add auxiliary function to the program:
1. Select the desired washing program by
pressing the program Selection key.
2. In the selected washing program,
if auxiliary function is selected, the
corresponding indicator will be active. If the
Extra Function key is pressed again, the
corresponding indicator of another auxiliary
function will be active.
3. The selection of the auxiliary function
will be cancelled when you press the Extra
Function key six times.
Sanitize Options
Sanitize function raises the water
temperature in the final rinse.
i. At the end of a successful sanitization,
“--” is displayed on the display and End of
program indicator will be active.
ii. “Available programs and options are
indicated on program Table and Options
Table charts
Loading ...
Loading ...
Loading ...