Loading ...
Loading ...
Loading ...
USA-CAN - 8
3. INSTALLATION
WARNING: When installing the dishwasher, follow basic
precau-tions, including the following:
Please check the standards and local codes for placement of
machine.
• Installation, maintenance and repair should be performed by a
qualied installer. Work by unqualied persons could be danger-ous
and may void the warranty.
• Do not operate the appliance if damaged, malfunctioning, partially
disassembled or if it has missing or broken parts.
• Before installation or service, disconnect the power supply to the
work area by unplugging the unit, “tripping” the circuit breaker or
removing the fuse.
• Only connect the dishwasher to the power supply when all
installation and plumbing work is complete.
• Never connect the ground wire to gas lines, or hot water pipes,
plumbing lines.
• Do not install or store the dishwasher where it can be ex-posed to
below freezing temperatures or exposed to weather.
• Dishwasher must be secured to adjacent cabinetry using the
brackets provided. Failure to do this may cause damage to property
or bodily injury.
• Connect to a properly rated, protected and sized power sup-ply
circuit to avoid electrical overload. The dishwasher is designed for
an electrical supply of 120 V (volts), 60 Hz (hertz),
AC, connected to a dishwasher-dedicated, properly grounded
elec-trical circuit with a fuse or breakers rated for 15 amperes.
Electrical supply conductors shall be a minimum of # 16 AWG
copper wire rated at 75 °C (167 °F) or higher. These requirements
must be met to prevent injury and machine damage. Consult a
qualied electri-cian if in doubt.
• Do not use any extension cord or portable outlet device to connect
the dishwasher to a power supply.
WARNING: Danger of suocation! Ensure that any plastic
wrap-pings, bags, small pieces etc. are disposed of safely and kept
out of the reach of children.
Loading ...
Loading ...
Loading ...