Hikvision IDS-TCV907-BER Operation User Manual

Loading ...

10.8 Set DST

If the region where the device is located adopts Daylight Saving Time (DST), you can set this

funcon.

Steps

Go to Conguraon → System → System Sengs → DST .

Check Enable DST.

Set Start Time, End Time, and DST Bias.

Click Save.

10.9 Debug

Note

The debug conguraons below are only provided to debug the device by the professionals.

10.9.1 Debug Device

You can enable the funcons to debug the device.

Steps

Go to Conguraon → Capture → Advanced → System Service .

Check the debug informaon according to your needs.

Note

The supported parameters vary with dierent models. The actual device prevails.

Enable Algorithm POS Informaon Debug

The algorithm POS informaon will be overlaid on the playback image when you play back

the video with the dedicated tool.

Enable Posioning Frame Debug

The posioning frames of vehicle bodies and license plates will be overlaid on the captured

pictures.

Enable Closed Posioning Frame

The boom lines of the posioning frames on the captured pictures will be displayed. The

frames will be closed.

Enable LPR Area Frame

The LPR area frames on the captured pictures will be displayed.

Network Trac Camera Operaon Manual

Loading ...

Hikvision IDS-TCV907-BER 9 MP ANPR All-Rounder Traffic Camera