Loading ...
Loading ...
Loading ...
Fault codes
NZ AU
33
Drain hose is not connected
correctly.
Ensure that the drain hose is connected in
accordance with the installation instructions.
Water inlet hose is crimped
or bent, so no or not enough
water gets to the dishwasher.
Check the water inlet hose and straighten
if needed. Touch to restart the dishwasher.
Insufficient water supply
pressure.
Check household water pressure.
Ensure the water is connected and turned
on. Touch to restart the dishwasher.
Water tap not turned on.
Drain pump is blocked.
Remove the drain filter and clear any water
from the drain.
Remove the sump insert and pump cover.
Remove any remnants of food or blockages
from the pump.
Take care in case sharp objects or fragments
of glass are blocking it, as these may cause
injury.
The turbidity sensor is dirty
and requires cleaning.
Gently clean the turbidity sensor with a soft
brush(ie toothbrush) to remove any buildup.
Ensure that the drain hose is connected in
accordance with the installation instructions.
The waste water is not
draining out.
Blocked drain connection.
Check that drain connection is free from
blockages.
Check the drain hose and straighten if needed.
Drain hose is crimped or
bent.
Turbidity
sensor
Pump cover
Sump insert
'A' fault codes
Follow the steps below to try and fix the issue.
Problem Possible cause What to do
A20
Drain fault
A10
No water
Loading ...
Loading ...