Loading ...
Loading ...
Loading ...
has not been pressed.
Press .
Dishwasher
will not start
Lower spray
arm rotates
with difficulty
Cover of
detergent
dispenser
cannot be
closed
Remnants
of detergent
stuck inside
dispenser
Water
remains
inside
dishwasher
after wash
has ended
Filter(s) blocked.
Clean the filter(s). See 'Maintenance' for
instructions.
Call your Haier Authorised Service Centre
or Customer Care.
Pump is jammed.
Check the drain hose and straighten if
needed.
Drain hose is crimped,
bent，or blocked.
Blocked drain connection.
Check that drain connection is free from
blockages.
Utensils are blocking
the detergent dispenser
from opening.
Ensure there are no large utensils
positioned in a way that will stop the
dispenser cover from opening when the
dishwasher door is closed.
Compartment was damp
when filled with detergent.
Detergent dispenser is
clogged with remnants
of detergent.
Wipe dispenser out with a damp cloth.
Dry the dispenser before adding detergent.
Wipe dispenser out with a damp cloth.
Dry the dispenser before adding detergent.
Remove detergent until the cover can be
closed.
Detergent compartment
has been overfilled.
Spray arm holes are
blocked by small items or
food particles.
Clean the spray arm. Refer to 'Maintenance'
for instructions.
Check the strainer and clean if necessary
– it is located where the water inlet hose
screws into the tap.
Blocked strainer in water
inlet hose.
Water tap not turned on.
Ensure water is connected and turned on.
The door is not properly
closed.
Ensure the dishwasher is plugged in and
the power supply is turned on at the wall.
Close the door.
No power.
Problem Possible cause
What to do
NZ AU
28
Troubleshooting
Display
flashing while
Keylock is on
This is normal. The display
remains on although the
buttons are disabled.
No action required.
Loading ...
Loading ...
Loading ...