Loading ...
Loading ...
Loading ...
Part 1 – Introduction
10
• To remove/insert the SD memory card or
perform the factory reset, make sure that the
cover is joined properly when screwing it.
Otherwise, the IP67 level is not guaranteed. For
more information, contact your product retailer.
• Do not remove the SD memory card while the
system is in operation. Removing the card while
the system is in operation can cause the system
to malfunction and/or corrupt data stored on
the SD memory card.
• An SD memory card is a consumable product
with a nite service life. Prolonged use will
damage the card's memory sectors and result
in data loss or memory card failure. Test the SD
memory card regularly and replace it whenever
necessary.
• Factory Reset Button
Factory reset button is under the SD memory card
slot. Restores the camera's default factory settings. For
more information, refer to the Factory Reset.
Cable
I
N
G
ND
OU
T
A
L
A
R
M
A
U
D
I
O
I
N
GN
D
O
U
T
1
3
4
5
2
6
1
Power In (Red Cable)
2
Network Port
3
Audio In
4
Audio Out
5
Alarm In
6
Alarm Out
• Power In
Connect to the power adapter (12 VDC).
• Network Port
Connect a network cable with an RJ-45 connector to
this port. If using a PoE switch, you can supply power
to the camera using an ethernet cable. For more
information on PoE switch use, refer to the switch
manufacturer's operation manual. You can congure,
manage, and upgrade this camera and monitor its
images from a remote computer over the network.
For mo
re information on network connection setup,
refer to the IDIS Discovery operation manual.
• Audio
In
DC-T4536HRX only
Connect an audio source to this port. (line in)
• Audio Out
DC-T4536HRX only
Connect an amplier to this port (line out). This
device does not feature a built-in audio amplier unit
and therefore requires the user to purchase a separate
speaker system with a built-in amplier.
Loading ...
Loading ...
Loading ...