PROHEAT 2X
®
REVOLUTION
™
Deep Cleaner
_______________
USER GUIDE
1548, 1550 SERIES
More of a video
person? Look for this
icon and go online
for an instructional
how-to video at
www.BISSELL.com
2
www.BISSELL.com
IMPORTANT SAFETY INSTRUCTIONS
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK
OR INJURY:
» Connect to a properly grounded outlet only. See grounding
instructions. Do not modify the 3-prong grounded plug.
» Do not leave appliance when it is plugged in. Unplug from
outlet when not in use and before servicing.
» Do not expose to rain. Store indoors.
» Do not allow to be used as a toy. Close attention is neces
-
sary when used by or near children.
» Do not use for any purpose other than described in this user
guide. Use only manufacturer’s recommended attachments.
» Do not use with damaged cord or plug. If appliance is not
working as it should, or has been dropped, damaged, left
outdoors, or dropped into water, have it repaired at an
authorized service center.
» Do not pull or carry by cord, use cord as a handle, close a
door on cord, or pull cord around sharp edges or corners.
» Do not run appliance over cord. Keep cord away from heat
-
ed surfaces.
» Do not unplug by pulling on cord. To unplug, grasp the plug,
not the cord.
» Do not handle plug or appliance with wet hands.
» Do not put any object into openings. Do not use with any
opening blocked; keep openings free of dust, lint, hair, and
anything that may reduce air flow.
» Keep hair, loose clothing, fingers, and all parts of body away
from openings and moving parts of the appliance and its
accessories.
» Turn OFF all controls before plugging or unplugging appli
-
ance.
» Use extra care when cleaning on stairs.
» Do not use to pick up flammable or combustible materials
(lighter fluid, gasoline, kerosene, etc.) or use in areas where
they may be present.
» Do not use appliance in an enclosed space filled with
vapors given off by oil-based paint, paint thinner, some
moth-proofing substances, flammable dust, or other explo
-
sive or toxic vapors.
» Do not use to pick up toxic material (chlorine bleach, ammo
-
nia, drain cleaner, etc.).
» Do not pick up anything that is burning or smoking, such as
cigarettes, matches or hot ashes.
» Do not pick up hard or sharp objects such as glass, nails,
screws, coins, etc.
» Do not use without filters in place.
» Use only BISSELL® cleaning formulas intended for use with
this appliance to prevent internal component damage. See
the “Cleaning Formulas” section of this guide.
» Do not immerse. Use only on surfaces moistened by the
cleaning process.
» Keep appliance on a level surface.
» Do not carry the appliance while in use.
» Always install float before any wet pick-up operation.
» Unplug before connecting TurboBrush® Tool.
» Plastic film can be dangerous. To avoid danger of suffoca
-
tion, keep away from children.
» If your appliance has a motorized Brush Roll, do not leave
machine running in the same spot without the handle fully
upright.
» Liquid must not be directed towards equipment containing
electrical components.
» Use only the type and amount of liquids specified under the
operations section of this guide.
» Use only on carpet moistened by cleaning process.
READ ALL INSTRUCTIONS BEFORE USING YOUR DEEP CLEANER.
When using an electrical appliance, basic precautions should be observed, including the following:
This model is for household use only. Commercial use of this unit voids the manufacturer’s warranty.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
WARNING
Improper connection of the equipment-grounding
conductor can result in a risk of electrical shock.
Check with a qualified electrician or service person
if you aren’t sure if the outlet is properly grounded.
DO NOT MODIFY THE PLUG. If it will not fit the
outlet, have a proper outlet installed by a qualified
electrician. This appliance is designed for use on
a nominal 120-volt circuit, and has a grounding
attachment plug that looks like the plug in the
illustration. Make certain that the appliance is con
-
nected to an outlet having the same configuration
as the plug. No plug adapter should be used with
this appliance.
GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded
wiring system. If it should malfunction or break
down, grounding provides a safe path of least
resistance for electrical current, reducing the risk
of electrical shock. The cord for this appliance has
an equipment-grounding con
-
ductor and a grounding plug. It
must only be plugged into an
outlet that is properly installed
and grounded in accordance
with all local codes and ordi
-
nances.
Grounded
Outlet
Grounding Pin
3
www.BISSELL.com
Safety Instructions...........2
Product View ................4
Assembly ...................5
Cleaning Formulas...........6
Operations ..................7
Maintenance & Care .........11
Troubleshooting ............16
Warranty ...................17
Service .....................17
Contact Information ........17
Product Registration....... 20
Parts & Supplies ........... 20
NOTE: Standard accessories
may vary by model. To identify
what should be included with
your purchase, please refer
to the “Carton Contents” list
located on the carton top flap.
What’s in the Box?
1. 2. 3. 4.
5. 6.
7.
8.
9.
1. Upper Handle
2. 1 Screw attached to
Upper Handle
3. Base with Dirty Water Tank
4. Clean Water Tank
5. Carry Handle
6. (2) Trial-Size Formulas
7. Accessory Bag & Hose
8. Attachments/Accessories
(vary by model)
9. Nozzle Clean Out Tool
Thanks for buying a BISSELL®
ProHeat 2X® Revolution™ Deep Cleaner
We love to clean and we’re excited to share one of our innovative products with
you. We want your BISSELL ProHeat 2X Revolution to work like new for the years
to come, so this guide has tips on how to use, maintain and, if there’s a problem,
troubleshoot.
Your BISSELL ProHeat 2X Revolution needs a little assembly before getting to
work, so flip to the “Assembly” section and let’s get started!
4
www.BISSELL.com
Product View
3
2
1
7
4
5
6
8
15
16
17
18
14
13
9
10
11
12
1 Upper Handle
2 Easy Fill/Formula Cap
3 Clean Water Tank
(1 Gallon Capacity)
4 Power Switch
5 Float Stack
6 Dirty Water Tank
7 Belt Access Door
8 Foot
9 Spray Trigger
10 In-Use Cord Clip
11 Cleaning Mode Switch
12 Accessory Hose Door
13 Belt/Brush Access Plate
14 EdgeSweep® Brushes
15 Carry Handle
16 Rubber Tab
(on Dirty Water Tank)
17 Quick Release™ Cord Wrap
18 Recline Pedal
5
www.BISSELL.com
Assembly
In Step 3 you will need a
Phillips-head screwdriver.
2
3 4
1
Next, align the Carry Handle with the slots
on either side of the base (behind the
Power Switch and Cleaning Mode Switch).
The Carry Handle will “click” into place.
First, insert
the Upper
Handle at the
top of the
base until you
hear a “click”.
Using a Phillips-head
screwdriver, secure the
Carry Handle and the Upper
Handle with the screw that’s
taped to the Upper Handle.
Wrap the cord around
the Carry Handle and
Quick Release™ Cord
Wrap.
At the bottom of the
Upper Handle, align the
Clean Water Tank with
the grooves and slide
the tank into place.
WARNING
Do not plug in your deep cleaner until you are familiar with all instructions and operating procedures.
5
Your deep cleaner
comes in four
easy-to-assemble
components and
an accessory bag.
• Base
• Upper Handle
• Clean Water Tank
• Carry Handle
click
Side
View
Side
View
6
www.BISSELL.com
WARNING
To reduce the risk of fi re and electric shock due to internal component damage, use only BISSELL
cleaning formula intended for use with this machine.
Cleaning Formula
Keep plenty of BISSELL® cleaning formulas on hand so you can clean whenever it fits your
schedule.
NOTE: Always use genuine BISSELL cleaning formulas for portable carpet and upholstery
cleaners in your machine.
Clean + Refresh
Powerful cleaning
and odor elimination
with Febreze
freshness
PET Stain & Odor
Removes tough pet
stains
Includes StainProtect
™
to protect against
future stains
PRO MAX
Clean + Protect
Our most powerful
formula for tough,
ground-in dirt & stains
Includes StainProtect
to protect against
future stains
PET PRO OXY
Urine Eliminator
Our best formula
for pet urine stains
& odors
Includes StainProtect
to protect against
future stains
Pet Stain & Odor
+ Antibacterial
Cleans and controls
odor causing bacteria
Use with
Certain trademarks used under license from The Procter & Gamble Company or its affiliates.
OXY Boost
Removes old,
set-in stains
permanently
PRO MAX
Boost
Add to formula
for 2X deep
cleaning power
PET OXY
Boost
Removes pet
stains and odors
permanently
PET Stain
Pretreat
Permanently
removes tough
pet stains &
odors with
Enzyme Action
PET PRO
OXY Stain
Destroyer
Permanently
removes tough
pet stains &
odors with OXY
PET Pretreat
+ Sanitize
Penetrates to
sanitize and
loosen tough
stains
Pretreat
Pretreat spots and stains to improve carpet
cleaning performance.
Boost
Add Boost carpet cleaning formula enhancers to
any formula to increase its effectiveness.
7
www.BISSELL.com
formula
Filling Your Clean Water Tank
1
Lift the Clean
Water Tank
straight up to
remove from the
machine.
The Clean Water
Tank is at the top
of the machine.
Clean Water Tank
(1 Gallon)
Dirty Water Tank
Unscrew the cap
from the Clean
Water Tank. Add
hot tap water to the
water fill line.
A few notes about filling the Clean Water Tank:
» Fill with hot (140°F/60°C MAX) tap water and add the appropriate
BISSELL® formula. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR
TANK IN MICROWAVE.
» When using BISSELL Deep Clean + Antibacterial formula: Only fill your
Clean Water Tank with the recommended amount of water and formula to achieve
antibacterial benefits.
2
ATTENTION
Do not overwet carpet. Be careful not to run over loose objects or edges of area rugs. Stalling the brush
may result in premature belt failure.
3
At the bottom of
the Upper Handle,
align the Clean
Water Tank with the
grooves and slide
the tank into place.
54
With Trial-Size
Antibacterial Formula:
Pour into the Clean
Water Tank up to the
EasyFill line. Twist
the cap back onto
the tank.
BISSELL
For Future Use
with Full Size
Antibacterial
Formula:
NOTICE
BISSELL Deep Clean + Antibacterial formula is only for BISSELL machines with EasyFill System.
After filling the Clean
Water Tank with hot tap
water, twist the yellow
cap back onto the tank.
Firmly insert the full-size
formula bottle into the
cap on the Clean Water
Tank and squeeze until
formula reaches the
EasyFill line.
8
www.BISSELL.com
NOTE: Fill with hot (140°F/60°C MAX) tap water and add the appropriate
BISSELL formula. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR
TANK IN MICROWAVE. Do not substitute BISSELL Formula with other household
cleaning products.
Unscrew the cap from the Clean Water Tank. Add hot
tap water to the water fill line. Next, reference the
chart below for formula amounts to add to the tank.
Twist cap back into place.
43
1
Lift the Clean Water Tank
straight up to remove from
the machine.
The Clean Water Tank is at
the top of the machine.
Clean Water Tank
(1 Gallon)
Dirty Water Tank
2
At the bottom of the Upper
Handle, align the Clean
Water Tank with the grooves
and slide the tank into place.
FORMULA FILLING
INSTRUCTIONS
DEEP CLEAN MODE EXPRESS CLEAN MODE
BISSELL Formulas
Fill water to the Water
Fill Line, then add 2.5 oz
of formula.
Fill water to the Water
Fill Line, then add 1.25 oz
of formula.
BISSELL® Formula
Filling Your Clean Water Tank (cont.)
Pour in more power with BISSELL Boosts
» Fill tank with water and formula (step 3 above).
» Add 2 ounces of any BISSELL Boost per 1 gallon of water.
» The ProHeat 2X® Revolution™ has a 1-gallon Clean Water Tank.
9
www.BISSELL.com
Cleaning Your Carpet
1
Press the Power Switch
to turn the machine
ON. To recline your
machine for use, press
the Recline Pedal with
your foot.
Plug into
a properly
grounded outlet.
32
4
Express Clean Mode:
Recommended Cleaning
Pace: 12 inches per second
1. Press the Spray Trigger
to apply solution while
making 2 wet passes
(1 forward, 1 back).
2. Release the Spray Trigger.
3. Make 2 dry passes
(1 forward, 1 back) to
suck up the dirty solution.
Do not hold down the
trigger for this step.
CLEANING TIPS:
» To prevent damage to Berber carpets, avoid repeated strokes in the same area.
» For best cleaning performance, clean with your machine in Deep Clean Mode.
» Choose Deep Clean Mode and use BISSELL Deep Clean + Antibacterial to deliver
antibacterial benefits.
» In Max Clean Mode dry time is an estimated 8 hours. To expedite the drying process,
place a fan in the room or near the carpet.
» In Express Clean Mode, the Dirty Water Tank will not get as full as when cleaning with
Deep or Max Clean Mode.
» It is common to refill the Clean Water Tank and empty the Dirty Water Tank multiple
times during the cleaning process. Room size and the speed at which you clean both
affect how often the tank may need to be refilled and/or emptied.
Select Cleaning Mode
Max Clean
» Provides a heavy cleaning for
your dirtiest carpets.
» Dry Time: About 8 hours.
Deep Clean
» Delivers a deep clean to your
carpet.
Express Clean
» Provides a lighter clean.
» Dry Time: About 30 minutes.
» Recommended Cleaning
Pace: 12 inches per second
Max Clean & Deep Clean Modes:
Using BISSELL® Deep Clean
+ Antibacterial Formula
1. Press the Spray Trigger
to apply solution while
making 3 slow, wet
passes (1 forward,
1 back and 1 forward
again).
2. Release the trigger.
3. Make 1 slow, dry pass
back to suck up the dirty
solution. Do not hold
down the trigger for
this step.
Standard Cleaning
1. Press the Spray
Trigger to apply
solution while making
2 slow, wet passes
(1 forward, 1 back).
2. Release the Spray
Trigger.
3. Make 2 slow, dry
passes (1 forward,
1 back) to suck up the
dirty solution.
Do not hold down the
trigger for this step.
10
www.BISSELL.com
Cleaning with Hose and Tool
IMPORTANT: Please check manufacturer’s tag before cleaning area rugs for any
specialized cleaning instructions. We do not recommend deep cleaning delicate, silk,
wool, antique, or area rugs without a manufacturer’s tag.
Cleaning Area Rugs
2
Insert the hose and
snap into place.
Be sure the colored
hose release clip
is facing out, away
from machine.
Press the Spray Trigger button to spray
the soiled area, then slowly move tool
back and forth over the area.
Release the trigger to suck up the dirty
solution. Work in small sections until the
area is clean.
When finished cleaning, turn the machine
ON to suction up warm clean water to
rinse the inside of the hose and tool.
Detach the hose and tool and close the
Accessory Hose Door. Let the hose and
tool air dry before storing.
Attach the tool to the end of the hose.
(Tools may vary by model.) Press the
Power Switch to turn machine ON.
3
4
1
Lift the Accessory Hose Door on top of
foot on the front of the machine. The
door flips toward the machine to open.
NOTE: If using the Mini Deep Reach Tool, be sure the needles of the tool are pressed
down into the carpet so the spray gets into the carpet fibers.
Regularly clean your high-traffic area rugs in Express Clean Mode:
» Check the manufacturer’s tag.
» Select Express Clean Mode.
» When cleaning area rugs, place the rug on a sealed surface to test for colorfastness in
an inconspicuous area. Your cleaner should not be used on unsealed surfaces.
» Important: Keep the Foot of the deep cleaner perpendicular to the rug’s edge with
each cleaning pass to prevent damage.
» Keep hair, loose clothing, fingers, and all
parts of body away from openings and
moving parts. The Brush Roll continues
to rotate when in the upright position.
» The Brush Roll continues to turn while
product is turned ON and handle is in
upright position. To avoid damage to
carpet, rugs, furniture, and flooring,
avoid tipping cleaner or setting it on
furniture, fringed area rugs or carpeted
stairs during tool use.
» With Brush Roll on, do not allow cleaner
to sit in one location for an extended
period of time, as damage to floor can
result.
11
www.BISSELL.com
Emptying the Dirty Water Tank
To release Dirty Water
Tank, press down on the
colored tank handle.
Tilt the tank slightly toward
you. Grab the handle and
tank with both hands.
Pull Dirty Water Tank up
and away to remove.
Clean the red filter
below the Dirty
Water Tank by wiping
off any remaining dirt
or debris.
For quick empty:
Pull the Rubber Tab
(located in the middle
of the tank) and tilt to
pour.
When closing the
Rubber Tab, make
sure all edges are
sealed tight.
For final clean and
rinse: Unscrew the ring
at the bottom of tank.
Gently remove the Float
Stack, rinse,
and clean.
Once clean, return Float
Stack into the tank by
lining up the arrows
so they point at each
other. This is the only
way the Float Stack will
fit into the tank.
With the arrows
aligned, the Float Stack
should lock into place.
Return the ring and
twist to lock. Water
may leak if the ring is
not fully tightened.
2
Did You Know?
The Float Stack is
what prevents
your Dirty
Water Tank from
overflowing.
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical
outlet before performing maintenance or troubleshooting.
1 3
4
6
5
To return the Dirty
Water Tank: Angle
the tank and insert
bottom first. Then
tilt the tank toward
the machine and
push the top in until
it clicks into place.
12
www.BISSELL.com
1
Cleaning Machine After Use
Rinse the Clean Water Tank
with warm tap water. Fill the
tank with warm tap water,
twist the cap on and return
the tank to the machine.
Twist cap back
on tightly.
To flush and rinse machine
turn it ON and press the
Spray Trigger for 15 seconds
while making forward and
backward passes on carpet.
Release the trigger and suck
up water.
See page 11 to clean the
Dirty Water Tank from
the water that was just
sucked up. Empty the Clean
Water Tank and let dry
before storing. Wipe your
machine’s exterior with a
soft cloth.
WARNING
To reduce the risk of fi re, electric shock or injury, turn power OFF and disconnect plug from electrical
outlet before performing maintenance or troubleshooting.
NOTE: Be sure to clean the Brush Rolls and nozzle before storing your machine. Follow
these steps if your nozzle becomes clogged with hair or debris.
NOTICE To reduce the risk of a leaking condition, do not store unit where freezing may occur.
Damage to internal components may result.
13
www.BISSELL.com
Cleaning the Nozzle
21
3
4
If pet hair or debris
become clogged
in the nozzle, it can
be cleaned out of
the nozzle with the
Nozzle Clean Out
Tool.
Turn OFF and
unplug the machine.
Remove the nozzle from the Foot: flip the
Accessory Hose Door open and lift up on
the nozzle and Accessory Hose Door.
Return the nozzle back
to the foot of the
machine. Line up the
three hooks on the
nozzle to the bottom of
the foot (see arrows for location).
Rotate the nozzle up and click into place.
Close the Accessory Hose Door.
Hold the nozzle and insert the Nozzle
Clean Out Tool into the thin slot at the
front of the nozzle where it touches the
floor. Clean until free of pet hair or debris.
Cleaning the Brush Rolls
21
3
Turn OFF and unplug the
machine.
Lay the machine down
on its back or side.
Use the comb to brush
out the debris or hair from
the Brush Rolls.
14
www.BISSELL.com
Replacing Belts or Brush Rolls
2 3
1
4
What you will need: 1 Phillips-head screwdriver & 1 flathead screwdriver
Here you should see one (1) belt. This is
the flat pump belt. If this belt is broken,
gently remove it from the machine. We
will replace this belt in Step 5.
Remove the brush cover by lifting straight up. Remove the cogged large pump belt.
The Brush Rolls can be replaced or cleaned at this time, if needed.
Unplug the machine. Remove
both tanks from the machine.
Press the Recline Pedal and
lay the machine on its back.
Use a flathead screwdriver to
help lift and remove the Belt
Access Door.
Turn the machine on its side. The
Power Switch should be facing up.
Remove the 3 screws on the Belt/
Brush Access Plate using a Phillips-
head screwdriver. Remove the access
plate to expose the brush cover and
cogged large pump belt.
15
www.BISSELL.com
9
6 7
5
If only one spins, the opposite belt is
broken and you must remove both
brushes and replace the small cogged
brush belt.
Place the new belt around both brush
gears and slide them onto the thin
metal axles.
To replace the cogged large pump
belt, make sure your deep cleaner
is completely reclined. Begin by
wrapping the cogged large pump belt
around the small metal-toothed pulley.
While wrapped around the pulley,
stretch and wrap around the nearest
brush gear.
Return the Belt/Brush
Access Plate to the end of
the Brush Rolls by securing
with the 3 screws.
Return the brush cover.
Make sure that the
brushes are aligned and
the cover is secure.
If the flat pump belt
was broken, place a
new belt around the
red area of the large
pulley. Then use your
thumb to stretch it
toward the back of
the machine and
transfer it onto the
metal axle.
Lastly, slide the Belt
Access Door back into
place. You should hear
it “click” into place.
8
Spin either brush. If they both
spin, continue to Step 7.
Turn the machine
to lay on its back.
10
Replacing Belts or Brush Rolls (cont.)
16
www.BISSELL.com
Problem Possible causes Remedies
Reduced
spray OR
no spray
Clean Water Tank may be empty. Refill tank.
Clean Water Tank may not be
seated completely.
Turn power OFF. Remove and
reseat tank.
Pump may have lost prime in
Hose Cleaning Mode.
Hold end of hose below water level in
tank to prime.
No spray
through
hose & tool
The hose to your machine is
not primed.
With the machine OFF and
unplugged, remove the nozzle from
the foot. Place a ballpoint pen in
the black cylinder next to the screw.
When water bubbles up, remove
the pen. Reassemble the nozzle and
hose.
Loss of
suction
power
Tanks may not be seated properly. Pick up both tanks and reseat them
so they fit properly on the unit.
Dirty Water Tank has picked up
maximum amount of dirty water
and has reached full line.
Empty Dirty Water Tank.
Clean Water Tank is empty. Check fluid levels in the Clean Water
Tank. Refill the tank if it is empty.
Rubber Tab on Dirty Water Tank is
not sealed tight.
Check the Rubber Tab on the Dirty
Water Tank and press firmly on all
edges to secure it tightly (see step
4 on page 11 for details).
Accessory Hose Door may not be
closed tightly in place.
Check the Accessory Hose Door
and make sure it is closed tightly –
it should be locked into place.
Nozzle may be clogged from pet
hair or debris.
Use the Nozzle Clean Out Tool
and follow steps on page 13 for
“Cleaning Nozzle”.
No power
Cleaning Mode switch mistaken
for Power Switch.
Press the Power Switch on the left
side of the machine to turn the
machine ON.
Outlet may not be active. Try plugging in a different device that
uses a grounded outlet to test for
power from the outlet.
Leaking tank
Tank may have been over-filled. 1. Make sure your tank has the water
and formula in it that you’ve pre-
pared.
2. With the cap twisted ON tightly,
hold your tank at an angle, over a
sink or drain, so any extra water can
pour out of the space.
3. Wipe the tank dry with a cloth.
Water may be caught in space
between the tank and the tank’s
handle.
WARNING
To reduce the risk of electric shock, turn OFF and disconnect plug from electrical outlet
before performing maintenance or troubleshooting checks.
Troubleshooting
17
www.BISSELL.com
This warranty gives you specific legal rights,
and you may also have other rights which may
vary from state to state. If you need additional
instruction regarding this warranty or have
questions regarding what it may cover, please
contact BISSELL Consumer Care by E-mail or
telephone as described below.
It may be necessary to obtain some of your
personal information, such as a mailing
address, to fulfill terms of this warranty. Any
personal data will be handled pursuant to
BISSELL’s Privacy Policy, which can be found
online at www.BISSELL.com/privacy-policy.
Limited Three-Year Warranty
Subject to the *Exceptions and Exclusions
from the Terms of the Limited Warranty, upon
receipt of the product BISSELL will repair or
replace (with new, refurbished, lightly used, or
remanufactured components or products), at
BISSELL’s option, free of charge from the date
of purchase by the original purchaser, for three
years, any defective or malfunctioning part.
See information below on "If your BISSELL
product should require service”.
This warranty applies to product used for
personal, and not commercial or rental,
service. This warranty does not apply to
fans or routine maintenance components
such as filters, belts or brushes. Damage or
malfunction caused by negligence, abuse,
neglect, unauthorized repair, or any other use
not in accordance with the user guide is not
covered. This warranty will only be valid if the
product is used in the same country in which
it was sold.
BISSELL is not liable for incidental or
consequential damages of any nature
associated with the use of this product.
BISSELL’s liability will not exceed the purchase
price of the product.
Some states do not allow the exclusion or
limitation of incidental or consequential
damages, so the above limitation or
exclusion may not apply to you.
*Exceptions and Exclusions from the
Terms of the Limited Warranty
This warranty is exclusive and in lieu of
any other warranties, either oral or written.
Any implied warranties, which may arise
by operation of law, including the implied
warranties of merchantability and fitness for
a particular purpose, are limited to the three-
year duration from the date of purchase as
described above.
Some states do not allow limitations on how
long an implied warranty lasts, so the above
limitation may not apply to you.
Warranty
NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the
event of a warranty claim.
Service
Website:
www.BISSELL.com/service-centers
E-mail:
www.BISSELL.com/email-us
Call:
BISSELL Consumer Care
1-800-237-7691
Please do not return this product
to the store.
Other maintenance or service not included
in the manual should be performed by an
authorized service representative.
If your BISSELL® product should
require service:
Contact BISSELL Consumer Care to locate
a BISSELL Authorized Service Center in
your area. If you need information about
repairs or replacement parts, or if you have
questions about your warranty, contact
BISSELL Consumer Care.
Notes
Notes
We’re Waggin’ Our Tails!
BISSELL® proudly supports BISSELL Pet Foundation®
and its mission to help save homeless pets. When you
buy a BISSELL product, you help save pets, too. We’re
proud to design products that help make pet messes,
odors and pet homelessness disappear.
Visit BISSELLsavespets.com to learn more.
Registering is quick, easy and offers you benefits over the lifetime of your product.
You’ll receive:
BISSELL® Rewards Points
Automatically earn points for discounts and
free shipping on future purchases.
Faster Service
Supplying your information now saves you
time should you need to contact us with
questions regarding your product.
Product Support Reminders and Alerts
We’ll contact you with any important
product maintenance reminders and alerts.
Special Promotions
Optional: Register your email to receive
notice of offers, contests, cleaning tips, and
more!
Visit BISSELL.com/registration!
Love yr BISSELL® product?
Don’t keep it a secret.
Let us, and millions of others, know what you think!
Leave your star-rating on BISSELL.com
www.BISSELL.com
Parts & Supplies
Register your product today!
For Parts and Supplies, go to www.BISSELL.com and enter your model number in
the search field.
©2020 BISSELL Inc. All rights reserved.
Printed in China. Part Number 1623380 01/20 RevD
