Loading ...
Loading ...
Loading ...
Accessing the Camera
7
IMPORTANT:
1. If
Dynamic IP Address or PPPoE is enabled, you need to know
which IP address the camera will get from DHCP server or ISP to
log in. If your camera is installed in the LAN, use the GV-IP Device
Utility to look up its current dynamic IP address. See 7.2.1
Checking the Dynamic IP Address. If your camera uses a public
dynamic IP address via PPPoE, use the dynamic DNS Service to
obtain a domain name that is linked to the camera’s changing IP
address first. For details, see LAN Configuration and Advanced
TCP/IP sections, Administrator Mode Chapter in the GV-IPCAM
Firmware Manual.
2. If
Dynamic IP Address or PPPoE is enabled and you cannot
access the camera, you may have to reset the camera to its
factory default and then perform the network settings again. To
restore factory settings, see 1.5 Loading Factory Default.
83
Loading ...
Loading ...
Loading ...