Loading ...
Loading ...
Loading ...
Chapter 9 Upgrading System
Firmware
GeoVision periodically releases updated firmware on the website. The new
firmware can be simply loaded into the GV-IPCAM by using the Web
interface or IP Device Utility.
Before you start
z If you use the IP Device Utility for firmware upgrade, the computer
used to upgrade firmware must be under the same network of the
camera.
z Stop monitoring of the camera.
z Stop all remote connections, such as GV-VMS.
z While the firmware is being updated, the power supply must not be
interrupted.
WARNING: The interruption of power supply during updating causes
not only update failures but also damages to the camera. In this case,
please contact your sales representative and send your device back to
GeoVision for repair.
z Do not turn the power off within 10 minutes after the firmware is
updated.
92
Loading ...