Loading ...
Loading ...
Loading ...
6
AXIS Q1910/-E/AXIS Q1921/-E - Product overview
Unit connectors
Network connector - RJ-45 Ethernet connector. Supports PoE (Power over Ethernet, class 3). Shielded cables should be used
to comply with EMC.
Audio in (pink) - 3.5 mm input for a mono microphone, or a line-in mono s
ignal (left channel is used from a stereo signal).
Audio out (green) - 3.5 mm output for audio (line level), can be connected to a public address
(PA) system or an active
speaker with a built-in amplifier. A pair of headphones can also be connected. A stereo connector must be used for audio out.
SD memory card slot - A standard or high capacity SD memory card (not included) can be used for local recording with
removable storage.
Note:
Bef
ore removal, the SD card should be unmounted to prevent corruption of recordings. To unmount the SD card, go to
Setup > Systems Options > Storage > SD Card and click Unmount.
Window heater connector - 3-pin terminal block for connection of the AXIS Q1910-E/AXIS Q1921-E window heater.
Serial number label - Part number (P/N) and Serial number (S/N). The serial
number may be required during installation.
Power connector - 3-pin terminal block for power input. 8-20 V DC or 20-24 V AC.
Caution!
Incorrect connection of the wires could cause damage to the camera.
Control button - The control button is used for
• Restoring the camera to factory default settings, see
Resetting to the factory default settings,
on page 43.
• Connecting to AXIS Internet Dynamic DNS Service, see page 36. To connect, press the button once.
• Connecting to an AXIS Video Hosting System service, see page 36. To connect, press and hold the button until the sta-
tus LED flashes green.
Model DC power input AC power input
AXIS Q1910 8-20 V DC, max 8.2 W 20-24 V AC, max 12.7 VA
AXIS Q1910-E 8-20 V DC, max 11.2 W 20-24 V AC, max 17.4 VA
AXIS Q1921 8-20 V DC, max 6 W 20-24 V AC, max 10 VA
AXIS Q1921-E 8-20 V DC, max 10 W 20-24 V AC, max 16 VA
DC power input
AC power input
Loading ...
Loading ...
Loading ...