Loading ...
Loading ...
Loading ...
Version 23.00, November 2020
Rohde & Schwarz R&S
®
RTH1002, R&S
®
RTH1004 Handheld Oscilloscope 21
R&S
®
RTH-K10
SENT triggering and decoding
Protocol configuration
signal polarity
idle low, idle high
clock period (clock tick)
1 µs to 100 µs
clock tolerance
0 % to 25 %
data nibbles
1 to 6
serial message type
none, short serial message and enhanced
serial message
CRC version
legacy (Feb 2008) and v2010, v2016
(latest)
CRC calculation
SAE J2716 standard and TLE 4998X
pause pulse
no, yes, for constant frame length
frame length in clock ticks (applicable only
when pause pulse = constant frame
length)
104 to 922
auto threshold setup
assisted threshold configuration for SENT
triggering and decoding (software)
Trigger
source
any input channel or logical channel
trigger event setup
calibration or sync, transmission
sequence status, transmission sequence
status + data, serial message identifier,
serial message identifier + data, error
condition (any combination of calibration
pulse error, pulse period error,
transmission sequence CRC error, serial
message CRC error and irregular frame
length error)
transmission sequence status nibble
setup
from 0 to F, condition =, ≠
transmission sequence data nibbles setup
each nibble value from 0 to F,
condition =, ≠
serial message identifier setup
from 00 to FF, condition =, ≠;
identifier selectable from label list
serial message identifier type setup
(applicable only when the serial protocol =
enhanced serial message in protocol
configuration)
4 bit and 8 bit
serial message data setup
00 to FF (short serial message)
000 to FFF (enhanced serial message
with 8 bit ID)
0000 to FFFF (enhanced serial message
with 4 bit ID)
Decode
source
any input channel, logical channel
display type
decoded bus, tabulated list
color coding
transmission sequence:
sync/calibration, status, data bits, CRC,
pause pulse, calibration pulse error, pulse
period error, irregular frame length error
and CRC error;
serial message:
identifier, data, CRC, CRC error
data format
hex, decimal, octal, binary, ASCII,
symbolic
Loading ...
Loading ...
Loading ...