Hikvision DS-2SF8C442MXG-ELW/26F0 Hikvision TandemVu PTZ User Manual

Loading ...

Figure 8-6 Draw Area

Click Save.

10.

Repeat above steps to set other regions.

11.

Set arming schedule. See

Set Arming Schedule .

12.

Set linkage method. See Linkage Method Sengs .

8.2.5 Set Region

Exing Detecon

Region exing detecon is used to detect the objects movement of exing from a predened area.

When it occurs, the device takes linkage acons as response.

Steps

Go to VCA → Smart Event → Region Exing Detecon .

Select a channel.

Check Enable.

Oponal: Click Lock to lock PTZ control to prevent the interrupon from other PTZ related acon

during conguraon.

Normally, the PTZ control is automacally locked when you enter the conguraon interface.

You can manually resume the lock when the countdown is over.

Adjust the live image to the desired scene by using PTZ control

buons.

Note

PTZ control is only available for Camera 01.

Draw detecon area.

1) Select a Region No.. Up to 4 regions can be set.

TandemVu PTZ Camera User Manual

Loading ...

Hikvision DS-2SF8C442MXG-ELW/26F0 6MP Panoramic Bullet + 4MP PTZ TandemVu Camera,