Hikvision DS-2SF8C442MXG-ELW/26F0 Hikvision TandemVu PTZ User Manual

Loading ...

11.11.2 Set NTP Server

You can use NTP server when accurate and reliable me source is required.

Before You Start

Set up a NTP server or obtain NTP server informaon.

Steps

Go to

Conguraon → System → System Sengs → Time Sengs .

Select Time Zone.

Click NTP.

Set Server Address, NTP Port and Interval.

Note

Server Address is NTP server IP address.

Click Test to test server connecon.

Click Save.

11.11.3 Set DST

If the region where the device is located adopts Daylight Saving Time (DST), you can set this

funcon.

Steps

Go to Conguraon → System → System Sengs → DST .

Check Enable DST.

Select Start Time, End Time and DST Bias.

Click Save.

11.12 Set RS-485

RS-485 is used to connect the device to external device. You can use RS-485 to transmit the data

between the device and the computer or terminal when the communicaon distance is too long.

Before You Start

Connect the device and computer or termial with RS-485 cable.

Steps

Go to Conguraon → System → System Sengs → RS-485 .

Set the RS-485 parameters.

Note

You should keep the parameters of the device and the computer or terminal all the same.

TandemVu PTZ Camera User Manual

Loading ...

Hikvision DS-2SF8C442MXG-ELW/26F0 6MP Panoramic Bullet + 4MP PTZ TandemVu Camera,