Loading ...
Loading ...
Loading ...
P a g e | 28
6.13REPLACING THE MAINS SUPPLY CABLE
If the mains supply cable is damaged, then it must be replaced by a licensed
electrician
and at appropriate replacement.
The mains supply cable should be replaced in accordance with the following
instructions:
Switch the appliance off at your mains supply.
Open the box of the supply board.
Unscrew the clamp fixing the cable.
Replace the cable with one of the same length and in accordance
with the
specification given above.
The “green-yellow” earth wire must be connected to the earth terminal
marked “E”. It must be about 10 mm longer than the live and neutral wires.
The neutral wire must be connected to the terminal marked with letter (N).
The live
wire must be connected to the terminal marked with letter (L).
6.14INSTALLATION SUMMARY WARNINGS
Do not modify this appliance.
This appliance must be installed by an authorised installer, licensed gas fitter.
Prior to the installation, ensure that the local distribution conditions (nature
of the gas and gas pressure) and the adjustment of the appliance are
compatible.
The adjustment conditions for this appliance are stated on the label.
This appliance is not connected to a combustion products evacuation
device. It
should be installed and connected in accordance with
current installation
regulations. Particular attention should be given to
the relevant requirements
regarding ventilation.
Before installing, turn off the gas and electricity supply to the appliance.
All appliances containing any electrical components must be earthed.
Ensure that the gas pipe and electrical cable are installed in such a way
that they do not touch any parts of the appliance which may become hot.
Gas pipe or connector hose should not be bent or blocked by
any other
appliances.
web:brohn.com.au
Loading ...
Loading ...
Loading ...