Loading ...
Loading ...
Loading ...
P a g e | 21
Prolonged intensive use of the appliance may call for additional
ventilation, either
by the opening of a window, or by increasing the
level of the mechanical
ventilation device (where present).
This hob is not fitted with a device for discharging the products of
combustion.
Ensure that the ventilation rules and regulations are followed.
The walls behind and near the hob should be resistant to heat,
steam and
condensation.
Remember that the quantity of air necessary for combustion must never
be less
than 2m³/h for each kW of power (see total power in kW on the
appliance rating
plate).
6.6 DUAL GAS REGULATOR VALVE INTRODUCTION
Product features:
This product has a low-pressure pipeline regulator valve, built-in voltage
regulator
for gas products.
Natural gas and liquefied petroleum gas conversion function, need
to be
set manually.
Operating Temperature: -20℃~60℃ .
Inlet pressure setting: of natural gas 6 in.wc / liquefied gas 11 in.wc of.
The performance parameters of the following table:
Installation Method:
·
Users to install the external threads coated with an appropriate
amount of
sealant to seal can also choose other sealing methods.
·
Out of gas regulator valve thread must match the connecting thread with
the gas.
·
Regulator valve installation location must be perpendicular.
·
After installation, open the gas source switch, and check valvebody
with soap and water connections for leaks.
web:brohn.com.au
Loading ...
Loading ...
Loading ...