Loading ...
Loading ...
Loading ...
IMPORTANT SAFETY INSTRUCTIONS
13
If the electrical plug is removed from the power cord or if the
power cord is supplied without an electrical plug, the steam oven
must be connected to the electricity supply by a qualified service
technician.
If the power cord is damaged, it must be replaced with a special
power cord (see “Electrical connection” under “Installation”).
During installation, maintenance and repair work, the appliance
must be disconnected from the main electricity supply. It is only
completely isolated from the electricity supply when:
- The circuit breakers have been switched off, or
- The fuses of the electrical installation have been completely re-
moved, or
- Unplug (if plug present) the machine from the outlet. Pull the plug
not the cord.
If the steam oven is installed behind a cabinet front (e.g., a door),
do not close the cabinet front while the steam oven is in use. Heat
and moisture can build up behind the cabinet front when closed.
This can result in damage to the steam oven, the housing unit, and
the floor. Leave the door panel open until the steam oven has cooled
down completely.
Connection to the water supply should only be carried out by a
qualified specialist.
Miele cannot be held liable for damage caused by incorrect installa-
tion or connection.
The appliance must be connected to the cold water supply only.
The water supply must be easily accessible after the appliance
has been installed.
Before connection, check the intake and drain hoses for visible
signs of damage.
Loading ...
Loading ...
Loading ...