Loading ...
Loading ...
Loading ...
NOTICE
Using a new battery that has not been fully charged can damage the battery
and result in a shorter life. It can also hinder vehicle performance. Refer to the
battery charging information in the Maintenance chapter before installing the
battery.
CAUTION
To reduce the chance of sparks when installing the battery, always connect the
negative (-) black cable last.
1. Clean battery cables and terminals with a stiff wire brush. Corrosion can be
removed using a solution of one cup water and one tablespoon baking soda.
Rinse well with clean water and dry thoroughly.
2. Carefully install the battery into the vehicle.
3. Connect the positive (+) red cable as shown below. Torque to specification.
q
Flange Bolt
w
Battery Cable
e
Internal Tooth Lock Washer
r
Flat Washer
t
Flange Nut (Torque Applied)
TORQUE
Battery Terminals
62 in-lbs (7 N·m)
4. Install positive battery boot.
5. Connect and tighten the negative (-) black cable. Torque to specification.
6. Verify the battery cables are properly routed.
BATTERY STORAGE
Whenever the vehicle is not used for a period of three months or more, remove
the battery from the vehicle, ensure that it's fully charged, and store it out of the
sun in a cool, dry place. Check battery voltage each month during storage and
recharge as needed to maintain a full charge.
164
MAINTENANCE
Loading ...
Loading ...
Loading ...