Loading ...
Loading ...
Loading ...
7
Follow all National and local electrical codes.
1.
The heater must not be recessed in the ceiling. There must be enough space around the top of
the heater to ensure adequate ventilation.
2.
The heater should be at least 60 cm away from any surrounding walls.
3.
A distance of at least 90 cm should always be left in front of the heaters to ensure safety.
4.
The Heater should be mounted at a minimum of 20 cm above ground level.
5.
The Heater must not be located either directly below, or in front of a socket-outlet.
6.
The heater must be installed so as to prevent any control switches being able to be touched by
anyone who is in the shower or bath.
7.
Make sure that there is no possibility of inflammable material, combustible material or curtains
coming into contact with the heater, there is a risk of fire if this happens.
8.
DO NOT LEAVE THE HEATER UNATTENDED DURING USE.
3.1
UNPACKING AND TESTING APPLIANCE WALL
Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the
appliance operates properly by plugging the power supply cord into a conveniently located 120 Volt
grounded outlet.
3.2
GROUNDING APPLIANCE
This appliance is for use on 120 Volts. The cord has a plug as shown in
(A). An adapter as shown in (C) is available for connecting three-blade
grounding type plugs to two-slot receptacles. The green grounding lug
extending from the adapter must be connected to a permanent
ground such as a properly grounded outlet box. The adapter should
not be used if a three-slot grounded receptacle is available.
To disconnect appliance, turn controls to off, then remove plug from
outlet.
3.0 INSTALLATION INSTRUCTIONS
Loading ...
Loading ...
Loading ...