Loading ...
Loading ...
Loading ...
10
POWER
Turn the appliance ON/OFF.
NOTE: Make sure the main power switch on the top of fireplace is turned on
before operating.
Flame Increase (+)
Flame Decrease (-)
Control Flame brightness.
7 Settings: Press the flame brightness increase “+” Button or the flame
brightness decrease “-” Button to adjust to your desired brightness.
Heater Power
Control the Heater ON/OFF.
Press the “HEATER POWER” Switch to turn on or off the unit heater.
Heater I
Heater II
Control the Heater.
Press button to initiate the heater.
(OFF) no heater or blower.
" I ", heater blows warm air(750W)
"Ⅱ", heater blows hot air(1500W)
NOTE: Heater functions cycle from ( OFF ) ( I)( II )
WARNING: Do not move or remove the mesh trim panel, when the appliance is plugged in and operating.
This will cause the remote control and touch panel to no longer function.
NOTICE: When the heater is first turned on, a slight odor may be present. This is normal and should not occur
again unless the heater is not used for a long period of time.
NOTICE: To improve operation, aim the remote control at the front of the fireplace. DO NOT press the
buttons too quickly. Give the unit time to respond to each command.
Loading ...
Loading ...
Loading ...