Loading ...
Loading ...
Loading ...
Thermal Network Positioning System·Quick Start Guide
vi
Cautions
To ensure explosion-proof performance, do not damage explosion-proof surface
Do not drop the device or subject it to physical shock.
Wipe the device gently with a clean cloth and a small quantity of ethanol, if
necessary.
Do not aim the lens at the sun or any other bright light.
When any laser equipment is in use, make sure that the device lens is not exposed to
the laser beam, or it may burn out.
Do not expose the device to high electromagnetic radiation or extremely hot, cold,
dusty, or damp environments.
Place the device in a dry and well-ventilated environment.
Keep non-waterproof devices away from liquids.
Keep the device in original or similar packaging while transporting it.
A few device components (e.g., electrolytic capacitor) require regular replacement.
The average lifespan varies, so periodic checking is recommended. Contact your
dealer for details.
Improper use or replacement of the battery may result in explosion hazard. Replace
with the same or equivalent type only. Dispose of used batteries in conformance with
the instructions provided by the battery manufacturer.
Never attempt to disassemble the device.
Ex structure instruction
We have made adequate consideration in flameproof enclosure design of the
explosion-proof camera to prevent explosive gases getting into the inner volume, the
explosion inside the enclosure cannot cause the explosion of the external explosive
gases. We ensure the explosion-proof performance by strengthen enclosure the
strength, adjust the length and gap of the joint of associate components and limit the
maximum surface temperature.
The enclosure is able to subject to static pressure test (1.5 times of reference pressure
for at least 10s) specified in EN60079-01/IEC60079-1, no leakage or deformation
allowed after test.
The maximum surface temperature will no more than 80ºC in normal operation.
Tempering glass is adopted in observation port, the tempering glass shall pass the
impact and thermal shock test.
Protection the flameproof surface in maintaining of this product, otherwise the
damaged flameproof surface will affect the Explosion-proof performance.
Loading ...
Loading ...
Loading ...