Loading ...
Loading ...
Loading ...
Thermal Network Positioning System·Quick Start Guide
v
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to
avoid danger or property loss.
The precaution measure is divided into Warnings and Cautions:
Warnings: Neglecting any of the warnings may cause serious injury or death.
Cautions: Neglecting any of the cautions may cause injury or equipment damage.
Warnings
Grounding:
The both internal and external earthing shall be connected reliably.
Ground wire cross-sectional area of not less than the phase connector cross-sectional
area level, at least 4 mm².
The device should be used in compliance with local laws and electrical safety
regulations. Refer to the appropriate documentation for detailed information.
The input voltage should conform to IEC60950-1 standard: SELV (Safety Extra Low
Voltage) and the Limited Power Source (85 to 265 VAC). Refer to the appropriate
documentation for detailed information.
DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire
hazards caused by overload.
Make sure the plug is properly connected to the power socket.
If smoke, odor, or noise arises from the device, immediately turn off the power,
unplug the power cable, and contact the service center.
The installer and user are responsible for password and security configuration and its
settings.
Both internal and external grounds should be connected properly. (The cross section
area of the grounding wire must be no less than 4 mm², and no less than that of the
phase connector).
For permanently connected equipment the disconnect device shall be incorporated in
the equipment, unless the equipment is accompanied by installation instructions
stating that an appropriate disconnect device shall be provided as part of the building
installation.
Warnings Follow
these safeguards to
prevent serious
injury or death.
Cautions Follow these
precautions to prevent
potential injury or
material damage.
Loading ...
Loading ...
Loading ...