Loading ...
Loading ...
Loading ...
Thermal Network Positioning System·Quick Start Guide
16
5 Setting the System over the LAN
You shall acknowledge that the use of the product with Internet access might be
under network security risks. For avoidance of any network attacks and
information leakage, please strengthen your own protection. If the product does
not work properly, please contact with your dealer or the nearest service center.
To ensure the network security of the positioning system, we recommend you to
have the system assessed and maintained termly. You can contact us if you need
such service.
5.1 Wiring
To view and configure the system via LAN (Local Area Network), you need to connect the
network system in the same subnet with your PC. Then, install the SADP or client
software to search and change the IP of network system.
The following figure shows the cable connection of network system.
Network Positioning
System
Switch
Internet
NVR
PC
Figure 5-1 Wiring over LAN
5.2 Activating the System
Purpose:
You are required to activate the system first by setting a strong password for it before
you can use the system.
Activation via Web Browser, Activation via SADP, and Activation via client software are
supported. In the following sections, activation via web browser and SADP will be taken
as examples. You may refer to the user manual of the system for the details of activation
via client software.
5.2.1 Activation via Web Browser
Steps:
Loading ...
Loading ...
Loading ...