Loading ...
Loading ...
Loading ...
Steps
Note
This funcon should be supported by the device.
1.
Enter the Device Management page.
2.
Click Device tab on the top of the right panel.
3.
Click Online Device to show the online device area at the
boom of the page.
The searched online devices are displayed in the list.
4.
Check the device status (shown on Security Level column) and
select an
inacve device.
Figure 5-1 Online Inacve Device
5.
Click Acvate to open the Acvaon dialog.
6.
Create a password in the password
eld, and conrm the
password.
Cauon
The password strength of the device can be automacally
checked. We highly recommend you change the password of
your own choosing (using a minimum of 8 characters, including
at least three kinds of following categories: upper case leers,
lower case leers, numbers, and special characters) in order to
increase the security of your product. And we recommend you
change your password regularly, especially in the high security
system, changing the password monthly or weekly can
beer
protect your product.
Proper conguraon of all passwords and other security
sengs is the responsibility of the installer and/or end-user.
7.
Click OK to
acvate the device.
5.2 Adding Devices
The client provides various device adding modes including IP/
domain, IP segment, cloud P2P, ISUP protocol, and HiDDNS. The
client also supports imporng mulple devices in a batch when
there are large amount of devices to be added. The
secon only
introduces one mode, namely, adding a detected online device.
Steps
1.
Enter the Device Management module.
2.
Click Device tab on the top of the right panel.
3.
Click Online Device to show the online device area.
The searched online devices are displayed in the list.
4.
Select an online device in the Online Device area, and click
Add to open the device adding window.
Note
For the inacve device, you need to create the password for it
before you can add the device properly. For detailed steps,
refer to Acvang Devices.
6
Loading ...