Hikvision DS-3E1508-EI Hikvision DS-3E1508-EI User Manual

Loading ...

Figure 3-3 RJ45 Port Connecon

4 Powering on the Device

Please use the aached power cord in package to power on the

device.

Before powering your switch, make sure that:

•

The operang power supply is compliant with rated input

standard.

•

Port cables and grounding cables are correctly connected.

•

If there is outdoor cabling, connect a lightning rod and

lightening arrester to the cable.

Cauon

PoE power supply line and strong wire cannot be wired together,

otherwise PD equipment or switch ports will be burnt.

5 Device Management

The device can be congured and managed through iVMS-4200

soware, mainly including network parameter conguraon, port

conguraon, link aggregaon conguraon, network topology

display and so on.

Note

•

This chapter will briey introduce the device management

through the iVMS-4200 soware. For other funcons, please

refer to User Manual of iVMS-4200 Client Soware.

•

All pictures in this manual are for illustraon only, and the

specic interface is subject to the actual interface.

5.1 Acvang Devices

For the inacve devices, you are required to create a password to

acvate them before they can be added to the soware and work

properly.

Before You Start

Make sure the device to be

acvated is connected to the network

and is in the same subnet with the PC running the client.

Loading ...

Hikvision DS-3E1508-EI 8 Port Gigabit Smart Switch