Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/23037839-ds-3e1508-ei/bgb.png)
Note
•
Please prepare two M4 screws.
•
Ensure that the distance between the two screws equals
that between the two hanging holes.
•
Set aside at least 4 mm screws outside the wall.
3.
Align the hanging holes with screws, and hang the device on
the screws.
Figure 2-1 Wall-Mounted Installaon
2.3 Rack-Mounted Installaon
Steps
1.
Check the grounding and stability of the rack.
2.
Use the aached screws to x the two L-shaped brackets to the
sides of the switch.
Figure 2-2 Fix L-Shaped Brackets
3.
Place your switch on the rack,
x it to the rack with self-
prepared screws to stably install your switch.
Figure 2-3 Fix to the Rack
3 Grounding
3.1 Connecng the Grounding Cable
Grounding is used to quickly release overvoltage and overcurrent
induced by lightening for switch, and to protect personal safety.
Select the appropriate grounding method according to your
needs.
3.1.1 With Grounding Bar
3
Loading ...
Loading ...
Loading ...