Loading ...
Loading ...
Loading ...
en Descaling
32
1.
Remove any accessories from the cooking compart-
ment.
2.
ATTENTION!
Distilled water in the cooking compartment leads to
corrosion.
▶ Do not use distilled water.
Mix 0.4litres water with a drop of washing-up liquid
and pour into the centre of the cooking compart-
ment floor.
3.
Press "Cleaning".
4.
Press "Easy Clean".
5.
Press
to start the cleaning aid.
a A notification stating that you should carry out the
necessary preparatory work for the cleaning aid ap-
pears on the display.
6.
Press "OK" to confirm the notification.
a The cleaning aid starts. The duration counts down
on the display.
a Once the cleaning aid has run through to the end,
an audible signal sounds.
7.
Press any button to end the audible signal.
8.
After using the cleaning aid, finish cleaning the
cooking compartment.
→"Wiping down the cooking compartment",
Page32
20.2 Wiping down the cooking compartment
ATTENTION!
The prolonged presence of moisture in the cooking
compartment leads to corrosion.
▶ After using the cleaning aid, wipe the cooking com-
partment clean and allow it to dry fully.
Requirement:The cooking compartment must have
cooled down.
1.
Open the appliance door and remove the remaining
water with an absorbent sponge cloth.
2.
Clean the smooth surfaces in the cooking compart-
ment with a dish cloth or a soft brush. Remove stub-
born food remnants using a stainless steel scouring
pad.
3.
Remove limescale with a cloth soaked in vinegar.
Then wipe with clean water and rub dry with a soft
cloth (including under the door seal).
4.
If there is any stubborn dirt that you are unable to
remove, run the cleaning aid again once the cook-
ing compartment has cooled down.
5.
In order to dry the cooking compartment, leave the
appliance door open for around 1hour or use the
drying function.
→"Drying", Page33
Descaling
21 Descaling
To ensure that your appliance continues to operate cor-
rectly, it must be descaled regularly.
How frequently you need to run the descaling pro-
gramme depends on the water hardness and how
many times you have used the steam-assisted opera-
tions. The appliance indicates when only another 5 or
fewer steam-assisted operations are possible. If you do
not carry out descaling, you can no longer set any op-
eration with steam.
Descaling comprises several steps and takes
approximately 70-95minutes:
¡ Descaling (approx.55-70minutes)
¡ First rinse cycle (approx.8-12minutes)
¡ Second rinse cycle (approx.8-12minutes)
Carry out descaling in full.
If descaling is interrupted, you can no longer set any
operation. To ensure that the appliance is ready for op-
eration again, carry out 2 rinse cycles.
21.1 Preparing descaling
ATTENTION!
The length of time for which the descaler is left to work
is based on the recommended, liquid descaler. Other
descalers may damage the appliance.
▶ Only use the liquid descaler recommended by us
for the descaling programme.
If descaling solution comes into contact with the control
panel or other delicate surfaces, it will damage them.
▶ Remove descaling solution immediately with water.
1.
Mix the descaling solution:
‒ 200ml liquid descaler
‒ 400ml water
2.
Open the control panel.
3.
Remove the water tank and fill it with descaling solu-
tion.
4.
Once the descaling solution has been poured into
the water tank, slide the tank back in.
5.
Close the control panel.
21.2 Setting the descaling process
ATTENTION!
If descaling solution comes into contact with the control
panel or other delicate surfaces, it will damage them.
▶ Remove descaling solution immediately with water.
Requirement:→"Preparing descaling", Page32
1.
Press "Cleaning".
2.
Press "Descaling"
.
a The duration appears on the display. You cannot
change the duration of the descaling process.
3.
Press to start the descaling process.
a A notification stating that you should carry out the
necessary preparatory work for descaling appears
on the display.
4.
Press "OK" to confirm the notification.
a The descaling process starts. The duration counts
down on the display.
a Once the descaling programme has run through to
the end, an audible signal sounds.
21.3 Running the first rinse cycle
1.
Open the control panel and remove the water tank.
2.
Thoroughly rinse the water tank and fill it with fresh
water.
3.
Slide in the water tank and close the control panel.
a The rinse cycle starts. The duration counts down on
the display.
Loading ...
Loading ...
Loading ...