Loading ...
Loading ...
Loading ...
RE3 UHF Wireless RE3-RX receiver | en 35
Electro-Voice
User Manual
02-2023 | 05 | F.01U.362.808
7.3.12 Adjusting receiver output level
Setting the receiver output level through menu item 7, RX Output Level assigns either mic
level, or line level to the receiver XLR and ¼" TS output jacks. This is an important step in
ensuring the signal level leaving the receiver is appropriate for the destination circuit of either
a microphone preamp, or a line in preamp.
1. Press the ▼ button to scroll down to RX Output Level from the main menu. Select by
pressing SET to enter the RX Output Level screen.
M
4. Squelch
E
5. Mic Config
N
6. Volume
U
7. RX Output Level
2. The display shows the current volume setting of either MIC or LINE.
LINE
Output Level
MIC
3. To select desired level, pressing the ▲ button toggles from MIC to LINE, and the ▼ toggles
from LINE to MIC.
LINE
Output Level
MIC
4. Press SET to save changes and return to the main menu.
M
4. Squelch
E
5. Mic Config
N
6. Volume
U
7. RX Output Level
5. Either scroll ▼ to Exit and press SET, or briefly press SYNC on the receiver front panel to
return to the home screen.
M
9. Keylock
E
a. Display Option
N
b. Reset
U
c. Exit
7.3.13 Turning antenna power on and off
The receiver antenna jacks can supply 12vDC booster feed to power the optional RFAMP
booster, or ALPA active antenna.
1. From the main menu, press ▼ button to scroll to Antenna Power.
M
5. Mic Config
E
6. Volume
N
7. RX Output Level
U
8. Antenna Power
Loading ...
Loading ...
Loading ...