Loading ...
Loading ...
Loading ...
32 en | RE3-RX receiver RE3 UHF Wireless
02-2023 | 05 | F.01U.362.808
User Manual
Electro-Voice
2. The display shows the current squelch setting. The numbers on this scale are arbitrary
values from -5 to the left of 0, to +10 to the right of 0. Higher number values tighten the
gate threshold, while lower number values loosen the gate threshold.
Setup Squelch
-3
0
Low High
3. Pressing the ▲ button moves the fader bar to the right while increasing the displayed
value in single digit increments thereby tightening the noise gate, and pressing the ▼
button moves the fader bar to the left while decreasing the displayed value in single digit
increments thereby loosening the noise gate.
Setup Squelch
+2
0
Low High
4. Press SET to save and return to main menu.
M
1. Scan
E
2. Frequency
N
3. Group/Channel
U
4. Squelch
5. Either scroll ▼ to Exit and press SET, or briefly press SYNC on the receiver front panel to
return to the home screen.
M
9. Keylock
E
a. Display Option
N
b. Reset
U
c. Exit
7.3.10 Mic config submenu
Operating parameters of the transmitter can be set up within the MicConfig submenu and
written to the transmitter during the SYNC operation.
Enter the submenu as follows:
1. Press the ▼ or ▲ button to scroll to MicConfig in the main menu. Select by pressing SET
to enter the MicConfig screen.
M
2. Frequency
E
3. Group/Channel
N
4. Squelch
U
5. Mic Config
2. Press the ▼ or ▲ button to highlight the item to edit.
3. Press SET to toggle over and highlight the parameter on the right.
4. When highlighted, press ▼ or ▲ to make numerical or status changes to that parameter.
5. Press SET to toggle back to the menu option side on left.
6. Continue to scroll ▼ or ▲ to other items for editing.
7. When finished, scroll to Save Settings and press SET to save settings to prevent settings
being lost.
8. Exit Without Save option exits to the main menu without save.
Loading ...
Loading ...
Loading ...