Loading ...
Loading ...
Loading ...
2. Lift away the fairing, unplug the headlights and remove.
4. Remove the speaker screws and the speaker.
1. Using 3 of the screws in the provided hardware, mount the speaker adapter to the inner fairing. The
4th inner bottom screw locations are not used on FLH/ batwing models. For Road Glide models,
rotate the adapter until the notches in the adapter do not hit the factory mounting posts, and make
sure the flat spots on the outside of the adapter are toward the outer edge of the fairing.
2. Mount the new speaker with the hardware provided with the speakers. Do not re-use the factory
screws. (Figure B) Note: For the Roadglide and Sharknose models, the longer screw may be needed
in the lower mounting hole depending on the new speaker.
2014 + Street and Road Glide
7
8
(1) Ultra Classic Street Glide and Tri Glide bracket (x1)
(2) Road Glide mounting bracket (x1)
(3) Road Glide mounting bracket (x1)
(4) Universal Amp mounting plate (x1)
(5) Road Glide Amp mounting bracket (x1)
(6) Front speaker input for the Amplifier (White/Black) (x1)
(7) Front speaker input for the Amplifier (Gray/Black) (x1)
(8) Input from Amplifier front (x1)
(1) Amplifier (x1)
(2) Remote wire (x1)
(3) Front output harness (x1)
(4) Rear output harness (x1)
(5) Front input harness (x1)
(6) Rear input harness (x1)
(7) Wrench (x1)
Amplifier and Amp plate Installation
1998 – 2013 FLH/Batwing models:
BPS400.4 4 Channel Class D Amplifier Contents
BHD34 Amplifier Mounting Plate Kit Contents
(1)
(1)
(4)
(2)
(3)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(9) Output from Amplifier front (x1)
(10) Remote wire and pin (x1)
(11) Power/Ground harness (x1)
(12) Rear speaker input/output harness (x1)
(13) Rear speaker connector (x2)
(14) Screw Bag (x1)
(15) Nylon spacers (x4) + Double sides tape (x4)
(16) Wire Zip Tie Wraps (x8)
(2)
(3)
(4)
(5)
(6)
(7)
BHD3F
Harley Davidson Front System
BHD3F
Harley Davidson Front System
Loading ...
Loading ...
Loading ...