Loading ...
Loading ...
Loading ...
GETTING STARTED
HD Front Speaker installation
1998 – 2013 Street Glide /Batwing models:
1. Protect all painted surfaces.
2. Remove seat and disconnect negative battery terminal.
3. On 2009 and later models, it will help to remove the two T40 bolts, the ECM and tray
1. Cover the front fender.
2. Remove (2) T-27 Torx bolts from inner fairing (under mirrors)
3. Remove (2) T-27 Torx bolts from outer edges of inner fairing near the fork tubes (facing forward)
4. Remove (3) T-27 Torx bolts from bottom edge of windshield.
Note: Windshield and fairing will be loose once these screws are removed. Use extreme caution not
to damage fairing or windshield. Lift away and unplug headlight to remove outer fairing.
5. Remove windshield taking caution that the outer fairing is loose.
6. Lift away and unplug headlight to remove outer fairing.
7. Remove the remaining speaker screws and the speaker. Continue to kit assembly Loosen (6) T-25
Torx bolts from bottom, middle and top of left and right sides of the inner fairing.
BHD3F
Harley Davidson Front System
BHD3F
Harley Davidson Front System
Loading ...
Loading ...
Loading ...