EGO EG0803 POWER+ Earth Auger

Operator’s Manual - Page 25

For EG0803. Also, The document are for others EGO models: EG0800, EG08000-FC, IG0800, IG0800-FC

PDF File Manual, 112 pages, Read Online | Download pdf file

EG0803 photo
Loading ...
Loading ...
Loading ...
EARTH/ICE AUGER — EG0800/EG0800-FC/IG0800/IG0800-FC 25
STATUS INDICATOR
The power head of the auger features an LED status indicator to display the working
status of the machine. The LED indicator will illuminate only when the auger is started.
LED Status Indicator Working Condition Action
Solid green The auger works
properly.
Normal operation. No action
needed.
Solid red The auger is overloaded. Release the trigger, lift the auger
from the hole and check for the
causes of overload. You may need
to find an alternative place to dig
if a large obstruction has caused
the machine to stop.
If the problem still can not be
solved, contact EGO service
center for repair.
The auger is too cold. Release the trigger. Bring the
auger indoors to warm it up.
Solid orange Anti-kickback protection. Release the trigger, lift the auger
from the hole. Restart the auger
and gently lower it back into the
hole.
Flashing red The battery pack charge
is nearly depleted.
Charge the battery pack.
Flashing orange The auger is overheated. Stop the auger and wait for some
time to cool the auger.
Flashing green and
red alternately.
Communication fault. Contact EGO service center for
repair.
No light. If the LED indicator on
the battery pack flashes
orange or shines red,
the battery pack is
overheated.
Allow the battery pack to cool
down and restart the auger again.
Other electronics error. Contact EGO service center for
repair.
Loading ...
Loading ...
Loading ...