Loading ...
Loading ...
Loading ...
Menu Description
Advanced
menu
The advanced menu contains special
appliance functions for setting up your
appliance. Access to the Advanced
menu is protected by the numerical
code 151.
(see 3.2.2 Opening the Advanced menu)
3.2.1 Opening the Settings menu
Fig. 2 Example illustration
u
Carry out action steps according to the illustration.
w
Settings menu is open.
u
If necessary: Navigate to the desired function.
3.2.2 Opening the Advanced menu
Fig.3
Fig. 4 Example illustration, access with numerical code 151
u
Carry out action steps according to the illustration.
w
Expanded menu is open.
u
If necessary: Navigate to the desired function.
3.3 Sleep mode
If you do not touch the display for 1 minute, the display
switches to sleep mode. In sleep mode, the display
brightness is dimmed.
3.3.1 Ending sleep mode
u
Press any navigation key.
w
Sleep mode is ended.
4 Start-up
4.1 Switching on appliance (first use)
Make sure that the following requirements are fulfilled:
q
The appliance is properly installed and connected
according to the installation instructions.
q
All adhesive strips, adhesive and protective films
and transport locks are removed from inside and on
the appliance.
q
All marketing leaflets are removed from the drawers.
q
You are familiar with the functionality of the Touch
display. (see3 Functionality of the Touch display)
Switch on the appliance using the Touch display.
u
If the display is in sleep mode: Briefly touch the
display.
u
Carry out action steps according to the illustration.
Fig. 5 Example illustration
w
The status display appears.
w
The appliance cools to the temperature set at the
factory.
w
The appliance starts in demo mode (status display
with DEMO appears): If the appliance starts in demo
mode, you can deactivate demo mode within the
next 5 minutes. (seeDemo mode)
More information:
-
Start the IceMaker for the first time.
(see4.2 Starting the IceMaker for the first time*) *
-
Start the SmartDevice for the first time.
(see 1.3 SmartDevice) and (seeWiFi)
Note
The manufacturer recommends:
u
Stock with food: Wait for around 6 hours until the
set temperature is reached.
u
Store frozen foods at -18°C(-0°F) or colder.
u
Observe the notes on storing food. (see 5.1 Informa‐
tion regarding storage)
Note
Accessories can be purchased from the Liebherr
Service Center. The address for your respective country
can be found on the back of the instructions.
Start-up
8 * Depending on model and options
Loading ...
Loading ...
Loading ...