Loading ...
Loading ...
Loading ...
8.5 EasyFresh-Safe
The compartment lid can be removed for cleaning.
8.5.1 Removing the compartment lid
Fig. 103
If the drawers are removed:
u
Pull the lid up at the front in the retaining parts to
the opening Fig. 103(1).
u
Lift from the back and pull it up and out Fig. 103(2).
8.5.2 Inserting the compartment lid
Fig. 104
If the text THIS SIDE UP is on top:
u
Insert the lip of the cover over the opening of the
rear bracket Fig. 104(1) and click into place Fig. 104(2).
u
Position the cover where you want it
(see8.6 Humidity control) .
8.6 Humidity control
You can regulate the moisture in the drawer yourself by
adjusting the compartment cover.
The compartment cover is on the drawer itself and can
be covered with shelves or additional drawers.
Fig. 105
Low air humidity
u
Open the drawer.
u
Pull the drawer cover to the front.
w
If the drawer is closed: Gap between lid and
compartment.
w
Moisture levels lower in the Safe.
High air moisture:
u
Open the drawer.
u
Slide the compartment cover to the back.
w
If the drawer is closed: The cover seals the compart‐
ment.
w
Moisture levels rise in the Safe.
If there is too much moisture in the compartment:
u
Choose a “low moisture setting”.
-or-
u
Remove the moisture with a cloth.
8.7 Glass shelves
You can remove the glass shelf under the drawers for
cleaning.
You can remove the glass shelf under the drawers to
use VarioSpace.
8.7.1 Removing / inserting the glass shelf
Make sure that the following requirements are fulfilled:
q
Glass shelf under the drawer: Drawer has been
removed. (see8.4 Drawers)
Removing glass shelf
Fig. 106 Example illustration of glass shelf
u
Lift glass shelf at the front. Fig. 106(1)
u
Remove glass shelf to the front. Fig. 106(2)
Inserting the glass shelf
Fig. 107 Example illustration of glass shelf
Equipment
* Depending on model and options 27
Loading ...
Loading ...
Loading ...